Pall Acrodisc PVDF Syringe Filters, 0.2 µm, 25 mm, 25/Pk - AP-4792
The Acrodisc housing platform pairs with Pall's own proprietary membrane media, built for demanding analytical and bioprocess workflows. A sterilizing-grade syringe filter delivers point-of-use sterile filtration in a single-use format, without the housing and gasket maintenance a reusable stainless steel filter holder requires. The PVDF membrane delivers bacterial retention at the rated pore size while resisting HPLC mobile phases, alcohols, and mild hydrocarbons and wets HPLC samples despite a hydrophobic fluoropolymer backbone underneath. The polypropylene housing routes flow to minimize backpressure in service while leaving no seam for sample to bypass the membrane and delivers a chemically clean filtrate to the downstream step. For workflows requiring validated sterile-grade performance, point-of-use retention meets it without a separate sterilization step.
Prefiltration
- Two-stage construction pairs a borosilicate glass fiber prefilter with the downstream membrane
- Added glass fiber stage extends usable throughput by delaying membrane clogging
- Depth-loading glass fiber matrix captures particulate throughout its full thickness
- Glass fiber prefilter stage sustains flow through particle-laden, hard-to-filter samples
Membrane Characteristics
- Fluoropolymer chemistry resists microbial and fungal degradation
- Vapor-phase hydrogen peroxide decontamination cycles leave the membrane intact
- Low extractables preserve a clean chromatographic baseline
- Absolute pore rating ensures reproducible results between test runs
- Intrinsic protein binding runs lower than nylon or mixed cellulose ester
Housing Characteristics
- Stable across the full aqueous pH range in routine sample work
- Low moisture absorption keeps the housing dimensionally stable through humid storage and shipping
- Thermal-bonded construction keeps adhesives out of the fluid path
- Translucent housing wall allows visual confirmation of sample flow during filtration
A column clogging mid-run from unfiltered sample can cost you the rest of your analytical day. Upstream sample clarification keeps your separations clean and reproducible so your filtrate reaches the column clean. Request a Certificate of Analysis for a specific Pall lot number from our support team.
Sterilization Guidance
The housing supports customer autoclave sterilization at 121°C for 30 minutes.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 39psi
- Burst Pressure (psi)
- 60psi
- Connection Type
- Luer-Lock/ Luer Slip
- Construction
- Polypropylene (PP)
- Diameter
- 25mm
- Filtration Area
- 3.9cm²
- Flow Rate
- 95ml
- Holdup Volume
- < 100 µL
- Material
- Polyvinylidene Difluoride (PVDF)
- Maximum Operating Pressure
- 75psi
- Maximum Operating Temperature (°C)
- 82°C
- Pack Count
- 25
- Pore Size (µm)
- 0.2
- Prefilter (Yes/No)
- Yes
- Prefilter Material
- Borosilicate Glass (GxF)
- Sterility
- Nonsterile
- Sterilization
- Autoclavable at 121°C for 15-20 min
- Wettability
- Hydrophobic
- Pharmaceutical QC - Supports routine quality control testing by reliably filtering mild organic solvent mixtures and drug formulations daily.
- ELISA Biomarker Prep - Preserves low-abundance biomarkers during ELISA sample filtration, supporting accurate immunoassay quantitation.
- Pre-Blot Sample Prep - Ensures ultra-low protein binding for maximum sample recovery ahead of sensitive immunodetection protocols and assays.
- QuEChERS Extract Prep - Removes co-extracted waxes and pigments from QuEChERS extracts, protecting GC-MS and LC-MS systems during pesticide testing.
- Spectroscopy Prep - Provides optical clarity and low background interference, ideal for UV-Vis and fluorescence sample preparation work.
- Dissolution Testing - Removes undissolved particles from timed USP 711 dissolution aliquots, preventing skewed potency and release results.