Pall Acrodisc Water-Wettable PTFE Syringe Filters, 0.2 µm, 25 mm, 200/Pk - AP-4910
Every Pall production lot passes through the same arc, raw membrane casting to a finished device's integrity test, before performance counts as consistent. A sterilizing-grade syringe filter carries manufacturer bacterial retention testing built into the design, giving analysts documented sterile-grade performance without repeating that testing in-house for the format. Absolute-rated hydrophilic PTFE provides sterile-grade filtration at sub-micron pore sizes and takes up water-based and solvent samples instantly. Thermal-bonded PP construction leaves no seam for sample to bypass the membrane while standing firm against aqueous acids, bases, and alcohols during regular handling and routes flow to minimize backpressure in service. When sample preparation calls for a sterile filtrate at the point of injection, sterilizing-grade absolute retention delivers it directly, protecting the analytical method from microbial interference.
Membrane Characteristics
- Chemical compatibility holds steady across the full pH 1 to 14 range
- The fluoropolymer's chemical inertness keeps proteins stable in solution
- Absolute-rated pore structure delivers repeatable particle capture batch to batch
- The membrane's chemical compatibility extends to aggressive organic solvents beyond aqueous solutions
- Retention meets the Brevundimonas diminuta challenge standard for a 7-log reduction
Housing Characteristics
- The seal formed against the membrane blocks bypass at rated operating pressure
- Optimized internal geometry minimizes backpressure in service
- Resists stress cracking from aqueous salt and buffer solutions
- Polypropylene density near 0.90 g/cm3 keeps housing weight low relative to denser engineering plastics
Fine particulates that slip through raise your system backpressure and bring maintenance forward. Reliable particulate removal protects your instruments and your data so column life and baseline stability stay predictable. Request Pall's validation documentation from the Tisch Scientific team ahead of a method transfer or audit.
Sterilization Guidance
Customer autoclave compatibility at 121°C accommodates in-lab sterilization timing.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 42psi
- Connection Type
- Luer-Lock/ Luer Slip
- Construction
- Polypropylene (PP)
- Diameter
- 25mm
- Filtration Area
- 2.8cm²
- Flow Rate
- 120ml
- Holdup Volume
- < 100 µL
- Material
- Hydrophilic PTFE (wwPTFE)
- Maximum Operating Pressure
- 75psi
- Maximum Operating Temperature (°C)
- 55°C
- Pack Count
- 200
- Pore Size (µm)
- 0.2
- Sterility
- Nonsterile
- Sterilization
- Autoclavable at 121°C for 15-20 min
- Wettability
- Hydrophilic
- Universal HPLC Prep - A single filter handles both aqueous and organic mobile phases, removing the need for alcohol pre-wetting before injection.
- Natural Product Isolation - Clarifies botanical and marine extracts in mixed aqueous and organic media ahead of bioassay-guided fractionation.
- Pesticide Residue Testing - Handles acetonitrile-based QuEChERS extracts, clarifying food and environmental samples before LC-MS/MS residue analysis.
- Food Chemistry Testing - Clarifies mixed solvent extracts from processed food samples for FDA method compliance and residue verification.
- Flavor Compound Analysis - Removes solids from aqueous-organic flavor matrices before headspace and GC-MS aroma compound quantitation.
- Medical Device Extractables - Filters mixed aqueous and organic extraction media from device materials for biocompatibility evaluation.