Pall Acrodisc PTFE Syringe Filters, 0.2 µm, 25 mm - AP-4910TC
Syringe filter production at Pall answers to the same quality infrastructure standing behind its process-scale filtration systems. A sterilizing-grade syringe filter carries manufacturer bacterial retention testing built into the design, giving analysts documented sterile-grade performance without repeating that testing in-house for the format. The PTFE matrix handles concentrated acids and bases across demanding methods while delivering sterilizing-grade liquid retention at sub-micron pore sizes and stays chemically inert against solvents, acids, and alkalis. Thermal-bonded PP construction leaves no seam for sample to bypass the membrane while preserving sample chemistry across the flow path and resists degradation from routine sample matrices. When sample preparation calls for a sterile filtrate at the point of injection, sterilizing-grade absolute retention delivers it directly, protecting the analytical method from microbial interference.
Membrane Characteristics
- Aqueous buffers and HPLC mobile phases wet the hydrophilic surface instantly
- High porosity minimizes hold-up volume for small sample volumes
- Stable across a wide operating temperature range for demanding methods
- Solvent tolerance includes full-strength tetrahydrofuran and chlorinated solvents such as dichloromethane
- Non-fibrous, fully synthetic structure sheds no fibers into filtrate
Housing Characteristics
- Withstands standard 121°C steam autoclave cycles without softening or structural distortion
- Polypropylene housing tolerates dilute aqueous acids, bases, and alcohols used in routine sample prep
- The seal formed against the membrane blocks bypass at rated operating pressure
- Polypropylene density near 0.90 g/cm3 keeps housing weight low relative to denser engineering plastics
Particulates that reach your column with the sample foul the frits and shorten its life. Pre-injection filtration protects the resolution your methods depend on so your retention times and peak shapes stay consistent. Start a live chat with the Tisch Scientific team about packaging, unit count, and ship-date for your filtration order.
Sterilization Guidance
Customer autoclave compatibility at 121°C accommodates in-lab sterilization timing.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Material
- Polytetrafluoroethylene (PTFE)
- Pore Size (µm)
- 0.2
- Sterility
- Nonsterile
- Wettability
- Hydrophilic
- Air Monitoring - Ensures precise capture of airborne particulates for environmental analysis in demanding atmospheric monitoring conditions.
- Dissolution Testing - Stops the dissolution reaction and clarifies samples, with low API binding for accurate potency quantitation.
- Fuel Analysis Prep - Clarifies gasoline and other petroleum samples ahead of gas chromatography, protecting injector ports from residue buildup.
- Toxicology Screening - Clarifies protein-precipitated serum, plasma, and urine extracts ahead of LC-MS or GC-MS drug screening analysis.
- Sample Protection - Low-binding properties ensure maximum recovery of low-concentration analytes, improving accuracy in quantitative assay results.
- Photoresist Filtration - Clarifies photoresist solutions in organic casting solvent ahead of spin-coating, reducing particulate defect risk.