Pall Acrodisc Water-Wettable PTFE Syringe Filters, 0.45 µm, 25 mm, 1000/Pk - AP-4921
The Acrodisc housing platform pairs with Pall's own proprietary membrane media, built for demanding analytical and bioprocess workflows. A syringe filter's small hold-up volume limits sample loss, a meaningful difference when working with a limited or precious sample. The hydrophilic PTFE membrane suits aqueous and solvent-based samples alike while remaining indifferent to proteins throughout the run and admits aqueous samples on contact, with no pre-wetting. Thermal-bonded PP construction leaves no seam for sample to bypass the membrane while maintaining a low-dead-volume internal flow path and delivers a chemically clean filtrate to the downstream step. When chromatographic methods demand particle-free injections, the column stays clean from run to run, protecting method performance and column life.
Prefiltration
- Depth-loading glass fiber matrix captures particulate throughout its full thickness
- Two-stage construction pairs a borosilicate glass fiber prefilter with the downstream membrane
- Naturally hydrophilic borosilicate fiber wets quickly with aqueous samples
- Glass fiber prefilter stage sustains flow through particle-laden, hard-to-filter samples
Membrane Characteristics
- The membrane turns optically clear on contact with water, confirming full wetting
- The fluoropolymer's chemical inertness keeps proteins stable in solution
- Absolute-rated pore structure delivers repeatable particle capture batch to batch
- The fluorocarbon backbone's carbon-fluorine bonds rank among the strongest in organic chemistry
- The membrane's chemical compatibility extends to aggressive organic solvents beyond aqueous solutions
Housing Characteristics
- Inert polyolefin wall contributes minimal sample adsorption to the filtrate
- Stable across the full aqueous pH range in routine sample work
- Thermal-bonded construction keeps adhesives out of the fluid path
- Withstands standard 121°C steam autoclave cycles without softening or structural distortion
A particulate-laden aqueous sample makes the rest of your preparation unpredictable. Consistent aqueous clarification clears particulates without slowing your bench routine from the first sample of the day through the last. Reach out to the Tisch Scientific team about minimum order quantities and shipping timelines for your filtration product selection.
Sterilization Guidance
The housing supports customer autoclave sterilization at 121°C for 30 minutes.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 26psi
- Connection Type
- Luer-Lock/ Luer Slip
- Construction
- Polypropylene (PP)
- Diameter
- 25mm
- Filtration Area
- 2.8cm²
- Flow Rate
- 240ml
- Holdup Volume
- < 100 µL
- Material
- Hydrophilic PTFE (wwPTFE)
- Maximum Operating Pressure
- 75psi
- Maximum Operating Temperature (°C)
- 55°C
- Pack Count
- 1000
- Pore Size (µm)
- 0.45
- Sterility
- Nonsterile
- Sterilization
- Autoclavable at 121°C for 15-20 min
- Wettability
- Hydrophilic
- Food Chemistry Testing - Clarifies mixed solvent extracts from processed food samples for FDA method compliance and residue verification.
- Drug Stability Studies - Clarifies stressed formulation samples in aqueous and co-solvent matrices for ICH-compliant forced-degradation profiling.
- Cannabinoid Potency Testing - Clarifies cannabis and hemp extracts before HPLC quantitation, giving low analyte adsorption for accurate recovery.
- Biofuel Quality Analysis - Handles ethanol and biodiesel blends with aqueous matrices for ASTM method fuel composition and purity testing.
- Pharmaceutical API Testing - Filters active ingredient solutions in mixed aqueous and organic solvents for potency assay and impurity profiling.
- LC-MS Sample Prep - Minimizes membrane-derived extractables that can suppress ionization or add background peaks in mass spectrometry detection.