PES Syringe Filters, 0.22um, 13mm, Luer-Lok/Luer Slip, Transparent, Nonsterile, 100/Pk
GVS SKU: FJ13BNPPS002AH01PF

GVS ABLUO Polyethersulfone (PES) Syringe Filters, 0.22 µm, 13 mm, 100/Pk - FJ13BNPPS002AH01PF

GVS casts its own microporous membranes and assembles them into finished syringe filters under one roof, rather than sourcing either component externally. A sterilizing-grade syringe filter delivers point-of-use sterile filtration in a single-use format, without the housing and gasket maintenance a reusable stainless steel filter holder requires. PES's open pore layout leaves proteins less surface to contact while loading aqueous buffers with zero pre-wetting delay and tolerates aliphatic alcohols, glycols, and aqueous buffers. Low-extractable polypropylene keeps sample purity intact through the filtration pass while resisting degradation from routine sample matrices and maintains a low-dead-volume internal flow path. When sample preparation calls for a sterile filtrate at the point of injection, sterilizing-grade absolute retention delivers it directly, protecting the analytical method from microbial interference.

With no PFAS-bearing fluoropolymers anywhere in the flow path, per- and polyfluoroalkyl substances stay clear of the sample from the inlet through to the collected filtrate. Carrying independent third-party PFAS-free validation, the device shields low-level per- and polyfluoroalkyl determinations from the background contamination an ordinary filter can contribute during routine sample filtration. Trace PFAS workflows gain a filtration step that supports defensible, contamination-controlled results across the environmental and aqueous matrices these regulatory methods routinely place under scrutiny.

Membrane Characteristics

• Pore structure integrity holds through autoclave cycles up to 126°C
• Chemical breadth spans alcohols, glycols, and aqueous buffers
• Antibody and protein samples pass through PES with minimal adsorptive loss
• Sterilizing-grade PES membrane lots are challenge-tested against Brevundimonas diminuta to qualify 0.2 micron retention
• PFAS extractables test non-detectable under EPA Method 537.1

Housing Characteristics

• Inert polyolefin wall contributes minimal sample adsorption to the filtrate
• Resists stress cracking from aqueous salt and buffer solutions
• The seal formed against the membrane blocks bypass at rated operating pressure
• Impact-tolerant polypropylene body withstands routine bench handling without damage

Particulates in your buffers, reagents, and aqueous samples slow your preparation and throw off its consistency. General-purpose aqueous filtration supports the sample types you handle every day across your water-analysis and general analytical workflows. Request details on payment terms or standing-order arrangements for your routine filtration purchases.

For more information about chemical compatibility, please review our Chemical Compatibility Chart.

Color

Transparent

Connection Type

Luer-Lok/Luer Slip

Construction

Polypropylene housing, ultrasonically welded

Diameter

13mm

Filtration Area

0.76 cm²

Holdup Volume

<50 µL

Inlet Connection

Female Luer Lock

Material

Polyethersulfone (PES)

Maximum Operating Pressure

80 psi

Maximum Operating Temperature (°C)

90°C (194°F)

Outlet Connection

Male Luer Slip

Pack Count

100

Pore Size (µm)

0.22

Sterility

Nonsterile

Wettability

Hydrophilic

• Biological Assays - Protects sensitive enzymatic and antibody-based assays from particulate interference without adsorbing critical reagents.
• Organic Carbon Testing - Clarifies water samples ahead of DOC and UV254 analysis while keeping organic carbon adsorption to the membrane minimal.
• PFAS Water Testing - PES filters process aqueous samples for EPA Method 1633A PFAS testing without added fluorinated background.
• Media Preparation - Facilitates rapid sterilization of tissue culture additives, lowering contamination risk during sensitive laboratory work.
• Urine Drug Screening - Clarifies protein-poor urine samples for dilute-and-shoot LC-MS/MS toxicology testing without adsorbing target drug analytes.
• Cell Culture - Reduces the risk of mycoplasma contamination in growth media, supporting healthier cell lines and more reliable experimental outcomes.