Tisch Scientific Polyethersulfone (PES) Syringe Filters, 0.45 µm, 25 mm, 100/Pk - SF18304
Tisch Scientific's representatives greet every caller with patience, whatever brings them to the phone. Individually packaged and pre-tested, a syringe filter needs no functional check before use the way a shared reusable holder does. The PES membrane loads aqueous buffers with zero pre-wetting delay and tolerates aliphatic alcohols, glycols, and aqueous buffers. The polypropylene housing presses snugly against the membrane during the pass while sustaining efficient flow on viscous samples and stands firm against aqueous acids, bases, and alcohols during regular handling. Where small-volume samples must reach the instrument clean, low hold-up volume keeps sample loss minimal while the instrument stays protected from particulate damage.
Prefiltration
- Naturally hydrophilic borosilicate fiber wets quickly with aqueous samples
- Depth-loading glass fiber matrix captures particulate throughout its full thickness
- Glass fiber prefilter stage sustains flow through particle-laden, hard-to-filter samples
- High dirt-holding capacity suits very turbid, high-solids sample loads
Membrane Characteristics
- Compatibility spans both nucleic acid and protein-based filtration
- High flow rate pairs with a low extractable background
- Antibody and protein samples pass through PES with minimal adsorptive loss
- Inherent hydrophilicity allows instant aqueous wetting with no pre-wetting step
- Sulfone backbone's hydrolytic stability tolerates repeated autoclave steam sterilization cycles
Housing Characteristics
- Rated operating pressure supports filtration of high-resistance and viscous samples without housing distortion
- Plasticizer-free polyolefin construction keeps the fluid path clean
- Optimized internal geometry minimizes backpressure in service
- Withstands standard 121°C steam autoclave cycles without softening or structural distortion
Particulates in your buffers, reagents, and aqueous samples slow your preparation and throw off its consistency. Consistent aqueous clarification clears particulates without slowing your bench routine across the buffers and reagents your day-to-day prep depends on. Request a quote on bulk pricing for larger filtration orders from the Tisch Scientific team.
Sterilization Guidance
The housing supports customer autoclave sterilization at 121°C for 30 minutes.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 31.91psi
- Burst Pressure (psi)
- 87psi
- Connection Type
- Luer-Lok/Luer Slip
- Diameter
- 25mm
- Filtration Area
- 4.08cm²
- Flow Rate
- 65ml
- Holdup Volume
- 100μL
- Material
- Polyethersulfone (PES)
- Maximum Operating Pressure
- 87psi
- Maximum Operating Temperature (°C)
- 60°C
- Membrane Thickness (µm)
- 100-160μm
- Pack Count
- 100
- Pore Size (µm)
- 0.45
- Prefilter (Yes/No)
- Yes
- Prefilter Material
- GF
- Sterility
- Nonsterile
- Sterilization
- Autoclave 121°C for 30min/ gamma 25kGy
- Volume Throughput (ml)
- 50ml
- Weight
- 0.52
- Wettability
- Hydrophilic
- Urine Drug Screening - Clarifies protein-poor urine samples for dilute-and-shoot LC-MS/MS toxicology testing without adsorbing target drug analytes.
- PFAS Water Testing - PES filters process aqueous samples for EPA Method 1633A PFAS testing without added fluorinated background.
- Organic Carbon Testing - Clarifies water samples ahead of DOC and UV254 analysis while keeping organic carbon adsorption to the membrane minimal.
- Nucleic Acid Recovery - Processes DNA and RNA extracts with minimal nucleic acid adsorption, preserving yield on the hydrophilic PES surface.
- Biological Assays - Protects sensitive enzymatic and antibody-based assays from particulate interference without adsorbing critical reagents.
- Pesticide Residue Testing - PES membranes improve polar pesticide recovery in food-safety LC-MS/MS testing versus hydrogen-bonding nylon.