Polycarbonate Track Etch Membrane Discs, 0.08um, 25mm, Hydrophilic, Nonsterile, 100/Pk
GVS SKU: 1215058

Featuring a thin, microporous polycarbonate film with precisely defined cylindrical pores, these Polycarbonate Track Etch (PCTE) membrane discs deliver accurate surface separation at a 0.08um pore size in a 25mm diameter format. Polyvinylpyrrolidone (PVP) treatment renders the naturally hydrophobic polycarbonate hydrophilic, allowing the membrane to process aqueous and alcoholic samples without pre-wetting. Supplied nonsterile in a pack of 100, the smooth, translucent surface eases microscopic examination of retained particles.

Key Polycarbonate Track Etch Membrane Characteristics

• Hydrophilic surface: PVP-treated polycarbonate film wets readily for direct use with aqueous and alcoholic solutions.
• Precise cylindrical pores: Track-etch manufacturing produces uniform, straight-through pores with a narrow size distribution for accurate particle separation.
• Surface retention: Particles larger than the rated pore size are captured on the smooth, flat surface rather than within the depth of the film.
• Low protein binding: Minimal non-specific binding helps preserve sample integrity and recovery.
• Translucent, glass-like surface: Resists chemical staining and supports clear microscopic visualization of collected particulates.

Key Construction Characteristics

• Material: Single-layer polycarbonate track-etched film.
• Diameter: 25mm membrane disc.
• Color: White, not gridded.
• Sterility: Nonsterile.
• Pack: 100 discs per pack.

These membranes maintain consistent pore geometry and predictable flow behavior across the disc surface, supporting repeatable separation results. The low-binding, high-purity film helps protect sample integrity throughout filtration and downstream analysis.

Color

White

Construction

Single-layer polycarbonate film

Diameter

25mm

Grid (Yes/No)

No

Material

Polycarbonate Track Etch (PCTE)

Membrane Color

White

Pack Count

100

Pore Size (µm)

0.08

Sterility

Nonsterile

Wettability

Hydrophilic

• Particulate Analysis The smooth surface captures particles above 0.08um on top of the membrane for accurate counting and characterization.
• Epifluorescence and Optical Microscopy The thin, translucent, glass-like surface enables clear microscopic visualization of retained particles.
• Fluid Clarification Precise cylindrical pores remove fine particulates from aqueous and alcoholic samples.
• Cell Biology and Bioassays Low protein binding and uniform pore structure suit cellular-based filtration and assay work.
• High-Purity Filtration Low extractables and a clean polycarbonate film support filtration where high purity is required.
• Environmental Sample Preparation Surface retention supports water microbiology and environmental particulate analysis.