Tisch Scientific Polyethersulfone (PES) Syringe Filters, 0.05 µm, 25 mm, 100/Pk - SF15016
Tisch Scientific holds its filtration pricing at levels that let budget-conscious laboratories stretch procurement dollars further. A syringe filter's small hold-up volume limits sample loss, a meaningful difference when working with a limited or precious sample. The PES matrix tolerates aliphatic alcohols, glycols, and aqueous buffers while pairing fast flow with reduced protein adsorption and needs a surface treatment before its polysulfone base wets. Polypropylene construction maintains a low-dead-volume internal flow path while resisting degradation from routine sample matrices and holds its seal true run after run. Where small-volume samples must reach the instrument clean, low hold-up volume keeps sample loss minimal while the instrument stays protected from particulate damage.
Prefiltration
- High dirt-holding capacity suits very turbid, high-solids sample loads
- Two-stage construction pairs a borosilicate glass fiber prefilter with the downstream membrane
- Naturally hydrophilic borosilicate fiber wets quickly with aqueous samples
- Glass fiber prefilter stage sustains flow through particle-laden, hard-to-filter samples
Membrane Characteristics
- Mechanical strength keeps the matrix intact under vacuum or pressure
- Chemical breadth spans alcohols, glycols, and aqueous buffers
- Compatibility spans both nucleic acid and protein-based filtration
- Absolute pore size rating holds consistent across every lot
- Antibody and protein samples pass through PES with minimal adsorptive loss
Housing Characteristics
- Thermal-bonded construction keeps adhesives out of the fluid path
- Optimized internal geometry minimizes backpressure in service
- Low moisture absorption keeps the housing dimensionally stable through humid storage and shipping
- Housing rated for reliable filtration under syringe-applied backpressure at its maximum operating pressure
Unfiltered particulates shift your retention times and peak shapes from run to run. Upstream sample clarification keeps your separations clean and reproducible from sample preparation through final injection. Request details on payment terms or standing-order arrangements for your routine filtration purchases.
Sterilization Guidance
Standard autoclave cycles at 121°C for 30 minutes prepare the device for sterile workflows.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 37.71psi
- Burst Pressure (psi)
- 87psi
- Connection Type
- Luer-Lok/Luer Slip
- Construction
- Polypropylene (PP)
- Diameter
- 25mm
- Filtration Area
- 4.08cm²
- Flow Rate
- 12ml
- Holdup Volume
- 100μL
- Incompatibility
- Agressive organics
- Material
- Polyethersulfone (PES)
- Maximum Operating Pressure
- 87psi
- Maximum Operating Temperature (°C)
- 60°C
- Membrane Thickness (µm)
- 100-160μm
- Pack Count
- 100
- Pore Size (µm)
- 0.05
- Prefilter (Yes/No)
- Yes
- Prefilter Material
- GF
- Sterility
- Nonsterile
- Sterilization
- Autoclave 121°C for 30min/ gamma 25kGy
- Volume Throughput (ml)
- 50ml
- Weight
- 0.52
- Wettability
- Hydrophilic
- PFAS Water Testing - PES filters process aqueous samples for EPA Method 1633A PFAS testing without added fluorinated background.
- Sample Recovery - Minimizes sample loss in low-protein-binding applications, delivering high yield for precious or rare biological specimens.
- Pesticide Residue Testing - PES membranes improve polar pesticide recovery in food-safety LC-MS/MS testing versus hydrogen-bonding nylon.
- Urine Drug Screening - Clarifies protein-poor urine samples for dilute-and-shoot LC-MS/MS toxicology testing without adsorbing target drug analytes.
- Nucleic Acid Recovery - Processes DNA and RNA extracts with minimal nucleic acid adsorption, preserving yield on the hydrophilic PES surface.
- Biological Assays - Protects sensitive enzymatic and antibody-based assays from particulate interference without adsorbing critical reagents.