Tisch Scientific Polyethersulfone (PES) Syringe Filters, 0.45 µm, 13 mm, 100/Pk - SF14505
Tisch Scientific's representatives greet every caller with patience, whatever brings them to the phone. Syringe filters span a wide range of membrane chemistries and pore sizes, so the format can be matched to the sample matrix and solvent system in use. The PES matrix tolerates aliphatic alcohols, glycols, and aqueous buffers while needing a surface treatment before its polysulfone base wets and keeps that modified surface active throughout use. The polypropylene housing preserves sample chemistry across the flow path while resisting degradation from routine sample matrices and holds its seal true run after run. Where bench-scale prep must move quickly from one sample to the next, each sample starts as clean as the last without a carry-over risk or a cleaning step between uses.
Membrane Characteristics
- Inherent hydrophilicity allows instant aqueous wetting with no pre-wetting step
- PFAS extractables test non-detectable under EPA Method 537.1
- High flow rate pairs with a low extractable background
- Chemical breadth spans alcohols, glycols, and aqueous buffers
- Non-ionic surface avoids charge-driven protein binding of positively and negatively charged membrane types
Housing Characteristics
- Thermal-bonded construction keeps adhesives out of the fluid path
- PP housing supplied sterile in individual packaging for immediate use in aseptic filtration without bench preparation
- Optimized internal geometry minimizes backpressure in service
- Polypropylene housing tolerates ethylene oxide gas sterilization cycles without softening or dimensional distortion
Particulates in your buffers, reagents, and aqueous samples slow your preparation and throw off its consistency. General-purpose aqueous filtration supports the sample types you handle every day so you can standardize one filter across most aqueous methods. Request comparable filtration options that may offer cost savings for your order from the Tisch Scientific team.
Sterilization Guidance
Sterile single-use packaging removes any in-lab sterilization preparation step.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 31.91psi
- Burst Pressure (psi)
- 87psi
- Connection Type
- Luer-Lok/Luer Slip
- Diameter
- 13mm
- Filtration Area
- 1.09cm²
- Flow Rate
- 14.5ml
- Holdup Volume
- 10μL
- Material
- Polyethersulfone (PES)
- Maximum Operating Pressure
- 87psi
- Maximum Operating Temperature (°C)
- 60°C
- Membrane Thickness (µm)
- 100-160μm
- Pack Count
- 100
- Pore Size (µm)
- 0.45
- Prefilter (Yes/No)
- Yes
- Prefilter Material
- PP
- Sterility
- Sterile
- Volume Throughput (ml)
- 10ml
- Weight
- 0.40
- Wettability
- Hydrophilic
- Organic Carbon Testing - Clarifies water samples ahead of DOC and UV254 analysis while keeping organic carbon adsorption to the membrane minimal.
- Urine Drug Screening - Clarifies protein-poor urine samples for dilute-and-shoot LC-MS/MS toxicology testing without adsorbing target drug analytes.
- Biological Assays - Protects sensitive enzymatic and antibody-based assays from particulate interference without adsorbing critical reagents.
- Life Science Prep - Speeds processing of viscous biological solutions, improving laboratory workflow efficiency during busy sample prep days.
- Pesticide Residue Testing - PES membranes improve polar pesticide recovery in food-safety LC-MS/MS testing versus hydrogen-bonding nylon.
- Serum Filtration - Clarifies serum and plasma samples quickly while retaining critical proteins needed for accurate downstream analytical testing.