Tisch Scientific Polyethersulfone (PES) Syringe Filters, 0.45 µm, 17 mm, 100/Pk - SF15607
Tisch Scientific holds its filtration pricing at levels that let budget-conscious laboratories stretch procurement dollars further. Many syringe filters ship with lot-specific quality documentation, giving analysts documented traceability beyond what an ad hoc bulk filtration setup typically provides. PES handles strong bases and oils across a broad aqueous range and needs a surface treatment before its polysulfone base wets. Thermal-bonded PP construction leaves no seam for sample to bypass the membrane while routing flow to minimize backpressure in service and stays inert across common laboratory solvents. Where bench-scale prep must move quickly from one sample to the next, each sample starts as clean as the last without a carry-over risk or a cleaning step between uses.
Membrane Characteristics
- Pore structure integrity holds through autoclave cycles up to 126°C
- Non-ionic surface avoids charge-driven protein binding of positively and negatively charged membrane types
- Ionic extractables from the membrane stay very low
- PFAS extractables test non-detectable under EPA Method 537.1
- Absolute pore size rating holds consistent across every lot
Housing Characteristics
- Stable across the full aqueous pH range in routine sample work
- Burst pressure rating provides a wide safety margin above the rated maximum operating pressure
- Minimal extractable release from the housing supports sensitive analytical work downstream
- Withstands standard 121°C steam autoclave cycles without softening or structural distortion
Juggling several filter types for one routine clarification eats up your bench time. General-purpose aqueous filtration supports the sample types you handle every day across your water-analysis and general analytical workflows. Request comparable filtration options that may offer cost savings for your order from the Tisch Scientific team.
Sterilization Guidance
Standard autoclave cycles at 121°C for 30 minutes prepare the device for sterile workflows.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 31.91psi
- Burst Pressure (psi)
- 87psi
- Connection Type
- Luer-Lok/Luer Slip
- Diameter
- 17mm
- Filtration Area
- 1.65cm²
- Flow Rate
- 26.5ml
- Holdup Volume
- 20μL
- Material
- Polyethersulfone (PES)
- Maximum Operating Pressure
- 87psi
- Maximum Operating Temperature (°C)
- 60°C
- Membrane Thickness (µm)
- 100-160μm
- Pack Count
- 100
- Pore Size (µm)
- 0.45
- Prefilter (Yes/No)
- Yes
- Prefilter Material
- GF
- Sterility
- Nonsterile
- Sterilization
- Autoclave 121°C for 30min/ gamma 25kGy
- Volume Throughput (ml)
- 20ml
- Weight
- 0.33
- Wettability
- Hydrophilic
- Nucleic Acid Recovery - Processes DNA and RNA extracts with minimal nucleic acid adsorption, preserving yield on the hydrophilic PES surface.
- Biological Assays - Protects sensitive enzymatic and antibody-based assays from particulate interference without adsorbing critical reagents.
- Life Science Prep - Speeds processing of viscous biological solutions, improving laboratory workflow efficiency during busy sample prep days.
- Pesticide Residue Testing - PES membranes improve polar pesticide recovery in food-safety LC-MS/MS testing versus hydrogen-bonding nylon.
- Urine Drug Screening - Clarifies protein-poor urine samples for dilute-and-shoot LC-MS/MS toxicology testing without adsorbing target drug analytes.
- Organic Carbon Testing - Clarifies water samples ahead of DOC and UV254 analysis while keeping organic carbon adsorption to the membrane minimal.