Chat with us, powered by LiveChat

Secure Checkout
PES Syringe Filters, 0.22 um, 30mm, Luer-Lok/Luer Slip, Nonsterile, 100/Pk

Thumbnail Filmstrip of PES Syringe Filters, 0.22 um, 30mm, Luer-Lok/Luer Slip, Nonsterile, 100/Pk Images

    Purchase PES Syringe Filters, 0.22 um, 30mm, Luer-Lok/Luer Slip, Nonsterile, 100/Pk

    PES Syringe Filters, 0.22 um, 30mm, Luer-Lok/Luer Slip, Nonsterile, 100/Pk
    Tisch SKU: SF15608

    $161.99
    Only 10 in stock. Order now!
     

    Tisch Scientific Polyethersulfone (PES) Syringe Filters, 0.22 µm, 30 mm, 100/Pk - SF15608

    Tisch Scientific vets its filtration partners carefully, favoring those with a consistent record of dependable output. A sterilizing-grade syringe filter carries manufacturer bacterial retention testing built into the design, giving analysts documented sterile-grade performance without repeating that testing in-house for the format. PES provides sterile-grade retention at the rated sub-micron pore size while loading aqueous buffers with zero pre-wetting delay and stays stable across the pH 1 to 14 range. Polyolefin construction sheds virtually no extractable material into the sample while sustaining efficient flow on viscous samples and resists degradation from routine sample matrices. When sample preparation calls for a sterile filtrate at the point of injection, sterilizing-grade absolute retention delivers it directly, protecting the analytical method from microbial interference.

    Membrane Characteristics

    • Finest available pore ratings achieve aseptic-grade filtration performance
    • Non-hydrogen-bonding surface avoids the polar adsorption nylon's amide backbone causes
    • Non-ionic surface avoids charge-driven protein binding of positively and negatively charged membrane types
    • Compatibility spans both nucleic acid and protein-based filtration
    • Sterilizing-grade PES membrane lots are challenge-tested against Brevundimonas diminuta to qualify 0.2 micron retention

    Housing Characteristics

    • Withstands standard 121°C steam autoclave cycles without softening or structural distortion
    • Medical-grade polypropylene with broad chemical compatibility
    • Inert polyolefin wall contributes minimal sample adsorption to the filtrate
    • Plasticizer-free polyolefin construction keeps the fluid path clean

    Juggling several filter types for one routine clarification eats up your bench time. General-purpose aqueous filtration supports the sample types you handle every day so you can standardize one filter across most aqueous methods. Start a live chat with the Tisch Scientific team about packaging, unit count, and ship-date for your filtration order.

    Sterilization Guidance

    Standard autoclave cycles at 121°C for 30 minutes prepare the device for sterile workflows.

    For more information about chemical compatibility, please review our Chemical Compatibility Chart.

    Bubble Point (psi)
    43.51psi
    Burst Pressure (psi)
    87psi
    Connection Type
    Luer-Lok/Luer Slip
    Diameter
    30mm
    Filtration Area
    4.9cm²
    Flow Rate
    40ml
    Holdup Volume
    100μL
    Material
    Polyethersulfone (PES)
    Maximum Operating Pressure
    87psi
    Maximum Operating Temperature (°C)
    60°C
    Membrane Thickness (µm)
    100-160μm
    Pack Count
    100
    Pore Size (µm)
    0.22
    Prefilter (Yes/No)
    Yes
    Prefilter Material
    GF
    Sterility
    Nonsterile
    Sterilization
    Autoclave 121°C for 30min/ gamma 25kGy
    Volume Throughput (ml)
    110ml
    Weight
    0.91
    Wettability
    Hydrophilic
    • Sample Recovery - Minimizes sample loss in low-protein-binding applications, delivering high yield for precious or rare biological specimens.
    • Nucleic Acid Recovery - Processes DNA and RNA extracts with minimal nucleic acid adsorption, preserving yield on the hydrophilic PES surface.
    • Media Preparation - Facilitates rapid sterilization of tissue culture additives, lowering contamination risk during sensitive laboratory work.
    • Biological Assays - Protects sensitive enzymatic and antibody-based assays from particulate interference without adsorbing critical reagents.
    • Urine Drug Screening - Clarifies protein-poor urine samples for dilute-and-shoot LC-MS/MS toxicology testing without adsorbing target drug analytes.
    • PFAS Water Testing - PES filters process aqueous samples for EPA Method 1633A PFAS testing without added fluorinated background.