Tisch Scientific Polyethersulfone (PES) Syringe Filters, 0.45 µm, 30 mm, 100/Pk - SF15609
Tisch Scientific's representatives greet every caller with patience, whatever brings them to the phone. Syringe filters span a wide range of membrane chemistries and pore sizes, so the format can be matched to the sample matrix and solvent system in use. PES delivers sharp cutoff at rated pore size and loads aqueous buffers with zero pre-wetting delay. The PP housing stays inert across common laboratory solvents and buffers in routine use and maintains a low-dead-volume internal flow path. When method reproducibility rests on consistent sample prep, syringe filtration holds that standard injection after injection.
Membrane Characteristics
- DNA and RNA pass through with negligible adsorptive loss
- Ionic extractables from the membrane stay very low
- Inherent hydrophilicity allows instant aqueous wetting with no pre-wetting step
- PFAS extractables test non-detectable under EPA Method 537.1
- Antibody and protein samples pass through PES with minimal adsorptive loss
Housing Characteristics
- Housing rated for reliable filtration under syringe-applied backpressure at its maximum operating pressure
- Standardized luer connection geometry provides secure engagement with standard syringe tips
- Minimal extractable release from the housing supports sensitive analytical work downstream
- The seal formed against the membrane blocks bypass at rated operating pressure
Juggling several filter types for one routine clarification eats up your bench time. Consistent aqueous clarification clears particulates without slowing your bench routine across the buffers and reagents your day-to-day prep depends on. Request blanket-order pricing and paperwork support for your routine filtration purchases.
Sterilization Guidance
Customer autoclave compatibility at 121°C accommodates in-lab sterilization timing.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 31.91psi
- Burst Pressure (psi)
- 87psi
- Connection Type
- Luer-Lok/Luer Slip
- Diameter
- 30mm
- Filtration Area
- 4.9cm²
- Flow Rate
- 78ml
- Holdup Volume
- 100μL
- Material
- Polyethersulfone (PES)
- Maximum Operating Pressure
- 87psi
- Maximum Operating Temperature (°C)
- 60°C
- Membrane Thickness (µm)
- 100-160μm
- Pack Count
- 100
- Pore Size (µm)
- 0.45
- Prefilter (Yes/No)
- Yes
- Prefilter Material
- GF
- Sterility
- Nonsterile
- Sterilization
- Autoclave 121°C for 30min/ gamma 25kGy
- Volume Throughput (ml)
- 110ml
- Weight
- 0.91
- Wettability
- Hydrophilic
- Biological Assays - Protects sensitive enzymatic and antibody-based assays from particulate interference without adsorbing critical reagents.
- Organic Carbon Testing - Clarifies water samples ahead of DOC and UV254 analysis while keeping organic carbon adsorption to the membrane minimal.
- Pesticide Residue Testing - PES membranes improve polar pesticide recovery in food-safety LC-MS/MS testing versus hydrogen-bonding nylon.
- Urine Drug Screening - Clarifies protein-poor urine samples for dilute-and-shoot LC-MS/MS toxicology testing without adsorbing target drug analytes.
- Sample Recovery - Minimizes sample loss in low-protein-binding applications, delivering high yield for precious or rare biological specimens.
- Life Science Prep - Speeds processing of viscous biological solutions, improving laboratory workflow efficiency during busy sample prep days.