Tisch Scientific Polyethersulfone (PES) Syringe Filters, 0.22 µm, 25 mm, 100/Pk - SPEC17053
Tisch Scientific's sales team brings fast, courteous service to every filtration order, from first quote through fulfillment. A sterilizing-grade syringe filter carries manufacturer bacterial retention testing built into the design, giving analysts documented sterile-grade performance without repeating that testing in-house for the format. PES provides sterile-grade retention at the rated sub-micron pore size while handling strong bases across a broad aqueous range and needs a surface treatment before its polysulfone base wets. The PP housing stays inert across common laboratory solvents and buffers in routine use while routing flow to minimize backpressure in service and ships pre-sterilized with individual packaging for aseptic filtration workflows. When sample preparation calls for a sterile filtrate at the point of injection, sterilizing-grade absolute retention delivers it directly, protecting the analytical method from microbial interference.
Membrane Characteristics
- Mechanical strength keeps the matrix intact under vacuum or pressure
- Ionic extractables from the membrane stay very low
- Sterilizing-grade PES membrane lots are challenge-tested against Brevundimonas diminuta to qualify 0.2 micron retention
- Inherent hydrophilicity allows instant aqueous wetting with no pre-wetting step
- Antibody and protein samples pass through PES with minimal adsorptive loss
Housing Characteristics
- PP housing supplied sterile in individual packaging for immediate use in aseptic filtration without bench preparation
- Plasticizer-free polyolefin construction keeps the fluid path clean
- Thermal-bonded construction keeps adhesives out of the fluid path
- Sterile barrier packaging assures the housing's factory-sterilized state is intact at the point of use
A column clogging mid-run from unfiltered sample can cost you the rest of your analytical day. Pre-injection filtration protects the resolution your methods depend on so your retention times and peak shapes stay consistent. Start a live chat with the Tisch Scientific team about packaging, unit count, and ship-date for your filtration order.
Sterilization Guidance
The device arrives factory sterile and is intended for single-use sample preparation.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 43.5psi
- Burst Pressure (psi)
- 116psi
- Connection Type
- Double Luer Lock
- Construction
- Polypropylene (PP)
- Diameter
- 25mm
- Material
- Polyethersulfone (PES)
- Maximum Operating Pressure
- 72.5psi
- Maximum Operating Temperature (°C)
- 80℃
- Pack Count
- 100
- Pore Size (µm)
- 0.22
- Sterility
- Sterile
- Weight
- 0.70
- Wettability
- Hydrophilic
- Pesticide Residue Testing - PES membranes improve polar pesticide recovery in food-safety LC-MS/MS testing versus hydrogen-bonding nylon.
- Organic Carbon Testing - Clarifies water samples ahead of DOC and UV254 analysis while keeping organic carbon adsorption to the membrane minimal.
- Media Preparation - Facilitates rapid sterilization of tissue culture additives, lowering contamination risk during sensitive laboratory work.
- Sample Recovery - Minimizes sample loss in low-protein-binding applications, delivering high yield for precious or rare biological specimens.
- Cell Culture - Reduces the risk of mycoplasma contamination in growth media, supporting healthier cell lines and more reliable experimental outcomes.
- Biological Assays - Protects sensitive enzymatic and antibody-based assays from particulate interference without adsorbing critical reagents.