Tisch Scientific Polyethersulfone (PES) Syringe Filters, 0.45 µm, 25 mm, 100/Pk - SPEC18101
Tisch Scientific's representatives greet every caller with patience, whatever brings them to the phone. Syringe filters span a wide range of membrane chemistries and pore sizes, so the format can be matched to the sample matrix and solvent system in use. PES admits aqueous reagents on contact, skipping any surfactant rinse and stays stable across the pH 1 to 14 range. The polypropylene housing preserves sample chemistry across the flow path while standing firm against aqueous acids, bases, and alcohols during regular handling and maintains a low-dead-volume internal flow path. Where bench-scale prep must move quickly from one sample to the next, each sample starts as clean as the last without a carry-over risk or a cleaning step between uses.
Membrane Characteristics
- Pore structure integrity holds through autoclave cycles up to 126°C
- Inherent hydrophilicity allows instant aqueous wetting with no pre-wetting step
- PFAS extractables test non-detectable under EPA Method 537.1
- Non-ionic surface avoids charge-driven protein binding of positively and negatively charged membrane types
- DNA and RNA pass through with negligible adsorptive loss
Housing Characteristics
- Stable across the full aqueous pH range in routine sample work
- Double luer-lock connections on inlet and outlet deliver a secure, leak-resistant in-line path for continuous filtration
- Thermal-bonded construction keeps adhesives out of the fluid path
- Burst pressure rating provides a wide safety margin above the rated maximum operating pressure
Particulates in your buffers, reagents, and aqueous samples slow your preparation and throw off its consistency. Consistent aqueous clarification clears particulates without slowing your bench routine from the first sample of the day through the last. Start a live chat with the Tisch Scientific team for real-time updates on product availability, lead time, or your order status.
Sterilization Guidance
Standard autoclave cycles at 121°C for 30 minutes prepare the device for sterile workflows.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 29psi
- Burst Pressure (psi)
- 116psi
- Connection Type
- Double Luer Lock
- Construction
- Polypropylene (PP)
- Diameter
- 25mm
- Filtration Area
- 4.08 cm²
- Material
- Polyethersulfone (PES)
- Maximum Operating Pressure
- 72.5psi
- Maximum Operating Temperature (°C)
- 80℃
- Pack Count
- 100
- Pore Size (µm)
- 0.45
- Sterility
- Nonsterile
- Weight
- 0.58
- Wettability
- Hydrophilic
- Life Science Prep - Speeds processing of viscous biological solutions, improving laboratory workflow efficiency during busy sample prep days.
- Sample Recovery - Minimizes sample loss in low-protein-binding applications, delivering high yield for precious or rare biological specimens.
- PFAS Water Testing - PES filters process aqueous samples for EPA Method 1633A PFAS testing without added fluorinated background.
- Biological Assays - Protects sensitive enzymatic and antibody-based assays from particulate interference without adsorbing critical reagents.
- Organic Carbon Testing - Clarifies water samples ahead of DOC and UV254 analysis while keeping organic carbon adsorption to the membrane minimal.
- Serum Filtration - Clarifies serum and plasma samples quickly while retaining critical proteins needed for accurate downstream analytical testing.