Tisch Scientific Polyethersulfone (PES) Syringe Filters, 3 µm, 25 mm, 100/Pk - SPEC18103
Tisch Scientific's product lineup extends from filtration membranes to devices and the consumable supplies laboratories use daily. Syringe filters span a wide range of membrane chemistries and pore sizes, so the format can be matched to the sample matrix and solvent system in use. PES handles strong bases and oils across a broad aqueous range while leaving proteins less surface area to contact and separates particulates precisely at its micron cutoff. The PP housing sustains efficient flow on viscous samples while holding its seal true run after run and sheds virtually no extractable material into the sample. When chromatographic methods demand particle-free injections, the column stays clean from run to run, protecting method performance and column life.
Membrane Characteristics
- PFAS extractables test non-detectable under EPA Method 537.1
- Mechanical strength keeps the matrix intact under vacuum or pressure
- Aromatic sulfone backbone underlies stability across the full pH range
- Sulfone backbone's hydrolytic stability tolerates repeated autoclave steam sterilization cycles
- Antibody and protein samples pass through PES with minimal adsorptive loss
Housing Characteristics
- Standardized luer connection geometry provides secure engagement with standard syringe tips
- Low moisture absorption keeps the housing dimensionally stable through humid storage and shipping
- Minimal extractable release from the housing supports sensitive analytical work downstream
- Withstands standard 121°C steam autoclave cycles without softening or structural distortion
Juggling several filter types for one routine clarification eats up your bench time. Consistent aqueous clarification clears particulates without slowing your bench routine across the buffers and reagents your day-to-day prep depends on. Request available pack sizes and lead times across this filtration line's membrane options from the Tisch Scientific team.
Sterilization Guidance
Standard autoclave cycles at 121°C for 30 minutes prepare the device for sterile workflows.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 4.35psi
- Burst Pressure (psi)
- 116psi
- Connection Type
- Double Luer Lock
- Construction
- Polypropylene (PP)
- Diameter
- 25mm
- Filtration Area
- 4.08cm²
- Material
- Polyethersulfone (PES)
- Maximum Operating Pressure
- 72.5psi
- Maximum Operating Temperature (°C)
- 80℃
- Pack Count
- 100
- Pore Size (µm)
- 3.0
- Sterility
- Nonsterile
- Weight
- 0.58
- Wettability
- Hydrophilic
- Sample Recovery - Minimizes sample loss in low-protein-binding applications, delivering high yield for precious or rare biological specimens.
- Life Science Prep - Speeds processing of viscous biological solutions, improving laboratory workflow efficiency during busy sample prep days.
- Nucleic Acid Recovery - Processes DNA and RNA extracts with minimal nucleic acid adsorption, preserving yield on the hydrophilic PES surface.
- PFAS Water Testing - PES filters process aqueous samples for EPA Method 1633A PFAS testing without added fluorinated background.
- Serum Filtration - Clarifies serum and plasma samples quickly while retaining critical proteins needed for accurate downstream analytical testing.
- Biological Assays - Protects sensitive enzymatic and antibody-based assays from particulate interference without adsorbing critical reagents.