Tisch Scientific Polyethersulfone (PES) Syringe Filters, 0.45 µm, 25 mm, 100/Pk - SPEC18105
Tisch Scientific's sales team brings fast, courteous service to every filtration order, from first quote through fulfillment. Because each syringe filter is dedicated to one sample, a failed or contaminated filtration stays isolated to its own analyst's run and leaves the next analyst's queue clear. The PES membrane loads aqueous buffers with zero pre-wetting delay and separates particulates precisely at its micron cutoff. Polyolefin construction sheds virtually no extractable material into the sample while leaving no seam for sample to bypass the membrane and stays inert across common laboratory solvents. Where analytical results depend on clean samples, the preparation step stays consistent from sample to sample through a pre-tested syringe filter.
Membrane Characteristics
- Antibody and protein samples pass through PES with minimal adsorptive loss
- Compatibility spans both nucleic acid and protein-based filtration
- PFAS extractables test non-detectable under EPA Method 537.1
- Mechanical strength keeps the matrix intact under vacuum or pressure
- Ionic extractables from the membrane stay very low
Housing Characteristics
- Double luer-lock connections on inlet and outlet deliver a secure, leak-resistant in-line path for continuous filtration
- Resists stress cracking from aqueous salt and buffer solutions
- Standardized luer connection geometry provides secure engagement with standard syringe tips
- Thermal-bonded construction keeps adhesives out of the fluid path
Particulates in your buffers, reagents, and aqueous samples slow your preparation and throw off its consistency. Consistent aqueous clarification clears particulates without slowing your bench routine from the first sample of the day through the last. Request volume pricing and stock availability on your filtration product selection from the Tisch Scientific team.
Sterilization Guidance
Sterile single-use packaging removes any in-lab sterilization preparation step.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 29psi
- Burst Pressure (psi)
- 116psi
- Connection Type
- Double Luer Lock
- Construction
- Polypropylene (PP)
- Diameter
- 25mm
- Material
- Polyethersulfone (PES)
- Maximum Operating Pressure
- 72.5psi
- Maximum Operating Temperature (°C)
- 80℃
- Pack Count
- 100
- Pore Size (µm)
- 0.45
- Sterility
- Sterile
- Weight
- 0.70
- Wettability
- Hydrophilic
- Nucleic Acid Recovery - Processes DNA and RNA extracts with minimal nucleic acid adsorption, preserving yield on the hydrophilic PES surface.
- Sample Recovery - Minimizes sample loss in low-protein-binding applications, delivering high yield for precious or rare biological specimens.
- Biological Assays - Protects sensitive enzymatic and antibody-based assays from particulate interference without adsorbing critical reagents.
- Organic Carbon Testing - Clarifies water samples ahead of DOC and UV254 analysis while keeping organic carbon adsorption to the membrane minimal.
- Serum Filtration - Clarifies serum and plasma samples quickly while retaining critical proteins needed for accurate downstream analytical testing.
- Life Science Prep - Speeds processing of viscous biological solutions, improving laboratory workflow efficiency during busy sample prep days.