Tisch Scientific Polyethersulfone (PES) Syringe Filters, 5 µm, 20 mm, 100/Pk - SPEC18118
Tisch Scientific's representatives greet every caller with patience, whatever brings them to the phone. Because each syringe filter is dedicated to one sample, a failed or contaminated filtration stays isolated to its own analyst's run and leaves the next analyst's queue clear. PES's open pore layout leaves proteins less surface to contact while staying stable across the pH 1 to 14 range and separates particulates precisely at its micron cutoff. ABS construction holds up to aqueous samples and buffers in routine prep while carrying high impact strength into a small device and encapsulates the membrane against bypass at rated pressure. Where analytical results depend on clean samples, the preparation step stays consistent from sample to sample through a pre-tested syringe filter.
Membrane Characteristics
- Antibody and protein samples pass through PES with minimal adsorptive loss
- Compatibility spans both nucleic acid and protein-based filtration
- Chemical breadth spans alcohols, glycols, and aqueous buffers
- Inherent hydrophilicity allows instant aqueous wetting with no pre-wetting step
- Non-hydrogen-bonding surface avoids the polar adsorption nylon's amide backbone causes
Housing Characteristics
- Luer-fit housing geometry interfaces securely with standard luer-type syringe barrels
- ABS housing remains stable in contact with dilute acetic acid and citric acid solutions
- The butadiene component of the terpolymer provides toughness and impact resistance
- Opaque body shields light-sensitive samples during the pass
Juggling several filter types for one routine clarification eats up your bench time. Consistent aqueous clarification clears particulates without slowing your bench routine across the buffers and reagents your day-to-day prep depends on. Request available pack sizes and lead times across this filtration line's membrane options from the Tisch Scientific team.
Sterilization Guidance
Sterile single-use packaging removes any in-lab sterilization preparation step.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 2.9psi
- Burst Pressure (psi)
- 116psi
- Connection Type
- Double Luer Lock
- Construction
- Acrylonitrile Butadiene Styrene (ABS)
- Diameter
- 20mm
- Material
- Polyethersulfone (PES)
- Maximum Operating Pressure
- 72.5psi
- Maximum Operating Temperature (°C)
- 80℃
- Pack Count
- 100
- Pore Size (µm)
- 5.0
- Sterility
- Sterile
- Weight
- 0.72
- Wettability
- Hydrophilic
- Pesticide Residue Testing - PES membranes improve polar pesticide recovery in food-safety LC-MS/MS testing versus hydrogen-bonding nylon.
- Life Science Prep - Speeds processing of viscous biological solutions, improving laboratory workflow efficiency during busy sample prep days.
- Serum Filtration - Clarifies serum and plasma samples quickly while retaining critical proteins needed for accurate downstream analytical testing.
- Sample Recovery - Minimizes sample loss in low-protein-binding applications, delivering high yield for precious or rare biological specimens.
- PFAS Water Testing - PES filters process aqueous samples for EPA Method 1633A PFAS testing without added fluorinated background.
- Nucleic Acid Recovery - Processes DNA and RNA extracts with minimal nucleic acid adsorption, preserving yield on the hydrophilic PES surface.