Tisch Scientific Polypropylene (PP) Syringe Filters, 0.22 µm, 25 mm, 100/Pk - SF14690
Tisch Scientific makes the ordering process straightforward, turning around requests for pricing and product information fast. Individually packaged and pre-tested, a syringe filter needs no functional check before use the way a shared reusable holder does. Low-binding polypropylene sustains throughput as a depth medium and holds up to aggressive process chemistries. Polypropylene construction maintains a low-dead-volume internal flow path while resisting degradation from routine sample matrices and preserves sample chemistry across the flow path. Where small-volume samples must reach the instrument clean, low hold-up volume keeps sample loss minimal while the instrument stays protected from particulate damage.
Membrane Characteristics
- Nonpolar surface chemistry favors organic solvents and other non-aqueous liquids
- Low binding throughout the depth matrix preserves dilute analyte concentration
- Wets through readily under modest differential pressure despite an inherently hydrophobic surface
- Operating pressure reaches 72 psi with a burst rating near 116 psi
- Trace-metal contribution from the polypropylene matrix remains negligible in analytical use
Housing Characteristics
- Polypropylene housing tolerates dilute aqueous acids, bases, and alcohols used in routine sample prep
- Burst pressure rating provides a wide safety margin above the rated maximum operating pressure
- Plasticizer-free polyolefin construction keeps the fluid path clean
- Inert polyolefin wall contributes minimal sample adsorption to the filtrate
A filter that softens or swells in your solvent fails you mid-run, batch after batch. Solvent-stream filtration handles the solvents and reagents your methods rely on from initial prep through final use. Start a live chat with the Tisch Scientific team about packaging, unit count, and ship-date for your filtration order.
Sterilization Guidance
Customer autoclave compatibility at 121°C accommodates in-lab sterilization timing.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 14.50psi
- Connection Type
- Luer-Lok/Luer Slip
- Construction
- Polypropylene (PP)
- Diameter
- 25mm
- Filtration Area
- 4.08cm²
- Flow Rate
- 18ml
- Holdup Volume
- 100μL
- Material
- Polypropylene (PP)
- Maximum Operating Pressure
- 87psi
- Maximum Operating Temperature (°C)
- 60°C
- Membrane Thickness (µm)
- 140-260μm
- Pack Count
- 100
- Pore Size (µm)
- 0.22
- Prefilter (Yes/No)
- No
- Sterility
- Nonsterile
- Sterilization
- Autoclave 121°C for 30min/ gamma 25kGy
- Volume Throughput (ml)
- 50ml
- Weight
- 0.52
- Wettability
- Hydrophobic
- Solvent Clarification - Resists a broad range of organic solvents, offering a versatile choice for general chemical clarification tasks in the lab.
- Lubricant Sample Prep - Filters petroleum-based and synthetic lubricant samples in aliphatic solvent media for ISO cleanliness and wear analysis.
- Petrochemical Sample Prep - Handles aliphatic and light petroleum process streams for GC and GC-MS hydrocarbon speciation and quality testing.
- Polymer Solution Prep - Handles THF and alcohol polymer solutions with high loads for GPC and SEC column protection and sample clarification.
- Rubber Compound Testing - Filters cyclohexane and alcohol rubber extract solutions for antioxidant and additive content analysis by chromatography.
- Dilute Acid Sample Prep - Withstands dilute hydrochloric and sulfuric acid streams, enabling acidic sample preparation without membrane attack.