Tisch Scientific Polypropylene (PP) Syringe Filters, 0.22 µm, 25 mm, 100/Pk - SF14798
Tisch Scientific reduces per-unit costs for laboratories that place blanket purchase agreements or large-quantity orders. Individually packaged and pre-tested, a syringe filter needs no functional check before use the way a shared reusable holder does. Hydrophobic polypropylene suits solvent and non-aqueous sample streams while resisting a broad range of organic solvents, acids, and bases in service and keeps binding low while capturing particulates through its depth. The polypropylene housing resists aqueous acids, bases, and alcohols in routine use while holding its seal true run after run and routes flow to minimize backpressure in service. When method reproducibility rests on consistent sample prep, syringe filtration holds that standard injection after injection.
Prefiltration
- Low protein binding limits loss of sensitive biologic samples
- Two-stage construction places a coarse polyethersulfone layer ahead of the final membrane
- Coarse polyethersulfone prefilter clarifies larger particulate upstream
- Delayed membrane clogging extends usable throughput per device
Membrane Characteristics
- Captures coarse particles near the surface and fine particles deeper within
- Solvent-stable polypropylene handles aliphatic hydrocarbons and common process oils
- Halogen-free composition avoids hazardous fluorine byproducts during incineration
- Polyolefin structure resists saponification under prolonged base contact
- Withstands fluids across the full pH range from 1 to 14
Housing Characteristics
- Polypropylene density near 0.90 g/cm3 keeps housing weight low relative to denser engineering plastics
- Burst pressure rating provides a wide safety margin above the rated maximum operating pressure
- Medical-grade polypropylene with broad chemical compatibility
- Minimal intrinsic autofluorescence from the polypropylene housing supports background-sensitive fluorescence-based assay work downstream
Particulates left in your organic solvents and reagents carry downstream into the step that depends on a clean feed. Reliable solvent prefiltration keeps a stray particulate from carrying into your downstream work before it carries into further processing. Standardize your filtration purchases across every method with volume pricing and documentation from the Tisch Scientific team.
Sterilization Guidance
Customer autoclave compatibility at 121°C accommodates in-lab sterilization timing.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Connection Type
- Luer-Lok/Luer Slip
- Construction
- Polypropylene (PP)
- Diameter
- 25mm
- Material
- Polypropylene (PP)
- Pack Count
- 100
- Pore Size (µm)
- 0.22
- Sterility
- Nonsterile
- Weight
- 0.52
- Wettability
- Hydrophobic
- Viscous Sample Prefilter - Handles heavy particulate loads with ease, acting as a dependable prefilter for viscous or dirty lab liquid samples.
- Diesel and Biodiesel Analysis - Filters fuel samples in alcohol and aliphatic solvent matrices for ASTM method compositional and purity testing.
- Dilute Acid Sample Prep - Withstands dilute hydrochloric and sulfuric acid streams, enabling acidic sample preparation without membrane attack.
- Pharmaceutical Dissolution Prep - Clarifies dissolution medium samples in acidic aqueous and buffered media as a prefilter for HPLC assay.
- Rubber Compound Testing - Filters cyclohexane and alcohol rubber extract solutions for antioxidant and additive content analysis by chromatography.
- Mining Acid Leachate Analysis - Processes dilute sulfuric acid mine drainage and leachate samples for dissolved metal and ion speciation analysis.