Tisch Scientific Polypropylene (PP) Syringe Filters, 0.45 µm, 4 mm, 200/Pk - SF18019
Tisch Scientific makes the ordering process straightforward, turning around requests for pricing and product information fast. Many syringe filters ship with lot-specific quality documentation, giving analysts documented traceability beyond what an ad hoc bulk filtration setup typically provides. Polypropylene resists a broad range of organic solvents, acids, and bases in service and sustains throughput as a depth medium. Thermal-bonded PP construction leaves no seam for sample to bypass the membrane and routes flow to minimize backpressure in service. When chromatographic methods demand particle-free injections, the column stays clean from run to run, protecting method performance and column life.
Membrane Characteristics
- Nominal pore ratings span submicron prefilter grades to coarse depth configurations
- Withstands repeated steam autoclave cycles at 121°C without structural degradation
- PP/PE depth medium tolerates progressive particle accumulation as dirt-holding capacity fills
- Nonpolar surface chemistry favors organic solvents and other non-aqueous liquids
- Captures coarse particles near the surface and fine particles deeper within
Housing Characteristics
- Thermal-bonded construction keeps adhesives out of the fluid path
- Burst pressure rating provides a wide safety margin above the rated maximum operating pressure
- Rigid polypropylene body maintains its geometry through routine filtration pressure
- Translucent housing wall allows visual confirmation of sample flow during filtration
Particulates left in your organic solvents and reagents carry downstream into the step that depends on a clean feed. Solvent-stream filtration handles the solvents and reagents your methods rely on across the organic solvents and harsh reagents your methods use. Request blanket-order pricing and paperwork support for your routine filtration purchases.
Sterilization Guidance
The housing supports customer autoclave sterilization at 121°C for 30 minutes.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 7.40psi
- Connection Type
- Luer-Lok/Luer Slip
- Construction
- Polypropylene (PP)
- Diameter
- 4mm
- Filtration Area
- 0.125cm²
- Flow Rate
- 1ml
- Holdup Volume
- 1μL
- Material
- Polypropylene (PP)
- Maximum Operating Pressure
- 87psi
- Maximum Operating Temperature (°C)
- 60°C
- Membrane Thickness (µm)
- 140-260μm
- Pack Count
- 200
- Pore Size (µm)
- 0.45
- Prefilter (Yes/No)
- No
- Sterility
- Nonsterile
- Sterilization
- Autoclave 121°C for 30min/ gamma 25kGy
- Volume Throughput (ml)
- 1ml
- Weight
- 0.24
- Wettability
- Hydrophobic
- Ink and Pigment Testing - Clarifies ink and pigment dispersions in organic carrier solvents for particle size and spectroscopic measurement.
- Cosmetics Ingredient Testing - Filters aqueous and alcohol cosmetic formulations for HPLC quantitation of active and preservative ingredients.
- DMSO Solution Handling - Filters dimethyl sulfoxide preparations and drug formulations without the membrane degradation of less resistant polymers.
- Mining Acid Leachate Analysis - Processes dilute sulfuric acid mine drainage and leachate samples for dissolved metal and ion speciation analysis.
- Diesel and Biodiesel Analysis - Filters fuel samples in alcohol and aliphatic solvent matrices for ASTM method compositional and purity testing.
- Biofuel Ethanol Analysis - Clarifies fuel ethanol and blended biofuel samples ahead of GC and refractometric purity and water content testing.