Tisch Scientific Polypropylene (PP) Syringe Filters, 3 µm, 25 mm, 100/Pk - SF18112
Tisch Scientific holds its filtration pricing at levels that let budget-conscious laboratories stretch procurement dollars further. Individually packaged and pre-tested, a syringe filter needs no functional check before use the way a shared reusable holder does. The polypropylene matrix delivers nominal retention with high dirt-loading capacity while remaining compatible with organic and non-aqueous fluids and tolerates solvents and acids that degrade many membranes. The PP housing sustains efficient flow on viscous samples while keeping sample purity intact through the filtration pass and stays inert across common laboratory solvents. Where bench-scale prep must move quickly from one sample to the next, each sample starts as clean as the last without a carry-over risk or a cleaning step between uses.
Membrane Characteristics
- Compatible with dilute acids, ketones, and aliphatic esters at room temperature
- Aqueous liquid is repelled while air passes freely through
- Flexible polypropylene fiber matrix adapts to modest pressure cycles without fracture
- Withstands fluids across the full pH range from 1 to 14
- Captures coarse particles near the surface and fine particles deeper within
Housing Characteristics
- Thermal-bonded construction keeps adhesives out of the fluid path
- Resists stress cracking from aqueous salt and buffer solutions
- Rigid polypropylene body maintains its geometry through routine filtration pressure
- Plasticizer-free polyolefin construction keeps the fluid path clean
An aggressive solvent can leach or break down a vulnerable filter and carry debris into your prep. Solvent-stream filtration handles the solvents and reagents your methods rely on from initial prep through final use. Request volume pricing and stock availability on your filtration product selection from the Tisch Scientific team.
Sterilization Guidance
Standard autoclave cycles at 121°C for 30 minutes prepare the device for sterile workflows.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 1.45psi
- Connection Type
- Luer-Lok/Luer Slip
- Construction
- Polypropylene (PP)
- Diameter
- 25mm
- Filtration Area
- 4.08cm²
- Flow Rate
- 100ml
- Holdup Volume
- 100μL
- Material
- Polypropylene (PP)
- Maximum Operating Pressure
- 87psi
- Maximum Operating Temperature (°C)
- 60°C
- Membrane Thickness (µm)
- 140-260μm
- Pack Count
- 100
- Pore Size (µm)
- 3.0
- Prefilter (Yes/No)
- No
- Sterility
- Nonsterile
- Sterilization
- Autoclave 121°C for 30min/ gamma 25kGy
- Volume Throughput (ml)
- 50ml
- Weight
- 0.52
- Wettability
- Hydrophobic
- Mining Acid Leachate Analysis - Processes dilute sulfuric acid mine drainage and leachate samples for dissolved metal and ion speciation analysis.
- Solvent Clarification - Resists a broad range of organic solvents, offering a versatile choice for general chemical clarification tasks in the lab.
- Industrial Solvent Monitoring - Clarifies organic solvent process streams and used-solvent recovery batches for quality and contamination analysis.
- Sample Cleanup - Clarifies organic solvents during synthesis and purification steps, helping remove reaction byproducts and debris before analysis.
- Diesel and Biodiesel Analysis - Filters fuel samples in alcohol and aliphatic solvent matrices for ASTM method compositional and purity testing.
- Paint and Coatings Analysis - Filters solvent-borne paint and resin solutions for HPLC and GC compositional and additive content measurement.