Tisch Scientific Polypropylene (PP) Syringe Filters, 10 µm, 25 mm, 100/Pk - SF18127
Tisch Scientific's sales team brings fast, courteous service to every filtration order, from first quote through fulfillment. Syringe filters span a wide range of membrane chemistries and pore sizes, so the format can be matched to the sample matrix and solvent system in use. The hydrophobic polypropylene matrix repels water in vent and solvent service while tolerating solvents and acids that degrade many membranes and sustains throughput as a depth medium. Polypropylene construction resists chemical degradation from routine sample matrices while maintaining a low-dead-volume internal flow path and presses snugly against the membrane during the pass. When method reproducibility rests on consistent sample prep, syringe filtration holds that standard injection after injection.
Membrane Characteristics
- Withstands repeated steam autoclave cycles at 121°C without structural degradation
- Nominal pore ratings span submicron prefilter grades to coarse depth configurations
- Metal-ion leaching resistance holds during acid-digested sample filtration
- Aqueous liquid is repelled while air passes freely through
- Captures coarse particles near the surface and fine particles deeper within
Housing Characteristics
- Optimized internal geometry minimizes backpressure in service
- Standardized luer connection geometry provides secure engagement with standard syringe tips
- Low moisture absorption keeps the housing dimensionally stable through humid storage and shipping
- Withstands standard 121°C steam autoclave cycles without softening or structural distortion
Particulates left in your organic solvents and reagents carry downstream into the step that depends on a clean feed. Reliable solvent prefiltration keeps a stray particulate from carrying into your downstream work so your downstream method starts with a clean sample. Request blanket-order pricing and paperwork support for your routine filtration purchases.
Sterilization Guidance
The housing supports customer autoclave sterilization at 121°C for 30 minutes.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 0.001
- Connection Type
- Luer-Lok/Luer Slip
- Construction
- Polypropylene (PP)
- Diameter
- 25mm
- Filtration Area
- 4.08cm²
- Flow Rate
- 250ml
- Holdup Volume
- 100μL
- Incompatibility
- Esters
- Material
- Polypropylene (PP)
- Maximum Operating Pressure
- 87psi
- Maximum Operating Temperature (°C)
- 60°C
- Membrane Thickness (µm)
- 140-260μm
- Pack Count
- 100
- Pore Size (µm)
- 10.0
- Prefilter (Yes/No)
- No
- Sterility
- Nonsterile
- Sterilization
- Autoclave 121°C for 30min/ gamma 25kGy
- Volume Throughput (ml)
- 50ml
- Weight
- 0.52
- Wettability
- Hydrophobic
- Polymer Solution Prep - Handles THF and alcohol polymer solutions with high loads for GPC and SEC column protection and sample clarification.
- Petrochemical Sample Prep - Handles aliphatic and light petroleum process streams for GC and GC-MS hydrocarbon speciation and quality testing.
- Rubber Compound Testing - Filters cyclohexane and alcohol rubber extract solutions for antioxidant and additive content analysis by chromatography.
- DMSO Solution Handling - Filters dimethyl sulfoxide preparations and drug formulations without the membrane degradation of less resistant polymers.
- Pharmaceutical Dissolution Prep - Clarifies dissolution medium samples in acidic aqueous and buffered media as a prefilter for HPLC assay.
- Injector Port Protection - Removes cell debris and protein precipitates before injection, guarding HPLC and GC autosampler needles from wear.