Tisch Scientific Polypropylene (PP) Syringe Filters, 0.45 µm, 13 mm, 100/Pk - SF18218
Tisch Scientific's sales team brings fast, courteous service to every filtration order, from first quote through fulfillment. Syringe filters span a wide range of membrane chemistries and pore sizes, so the format can be matched to the sample matrix and solvent system in use. Low-binding polypropylene sustains throughput as a depth medium while holding up to aggressive process chemistries and stays well suited to solvent-rich, non-aqueous specimens. Polypropylene construction maintains a low-dead-volume internal flow path and ships pre-sterilized with individual packaging for aseptic filtration workflows. Where bench-scale prep must move quickly from one sample to the next, each sample starts as clean as the last without a carry-over risk or a cleaning step between uses.
Membrane Characteristics
- Metal-ion leaching resistance holds during acid-digested sample filtration
- Nominal depth matrix distributes particulate load progressively through the medium volume
- Captures coarse particles near the surface and fine particles deeper within
- Aqueous liquid is repelled while air passes freely through
- Sustains throughput on particulate-laden solvent samples
Housing Characteristics
- Resists stress cracking from aqueous salt and buffer solutions
- Inert polyolefin wall contributes minimal sample adsorption to the filtrate
- Housing rated for reliable filtration under syringe-applied backpressure at its maximum operating pressure
- Minimal ionic background from the polypropylene housing supports ion chromatography and trace-metal ICP-MS sample preparation
A filter that softens or swells in your solvent fails you mid-run, batch after batch. Solvent-stream filtration handles the solvents and reagents your methods rely on across the organic solvents and harsh reagents your methods use. Request available pack sizes and lead times across this filtration line's membrane options from the Tisch Scientific team.
Sterilization Guidance
The device arrives factory sterile and is intended for single-use sample preparation.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 7.40psi
- Connection Type
- Luer-Lok/Luer Slip
- Construction
- Polypropylene (PP)
- Diameter
- 13mm
- Filtration Area
- 1.09cm²
- Flow Rate
- 11ml
- Holdup Volume
- 20μL
- Material
- Polypropylene (PP)
- Maximum Operating Pressure
- 87psi
- Maximum Operating Temperature (°C)
- 60°C
- Membrane Thickness (µm)
- 140-260μm
- Pack Count
- 100
- Pore Size (µm)
- 0.45
- Prefilter (Yes/No)
- No
- Sterility
- Sterile
- Volume Throughput (ml)
- 10ml
- Weight
- 0.40
- Wettability
- Hydrophobic
- Rubber Compound Testing - Filters cyclohexane and alcohol rubber extract solutions for antioxidant and additive content analysis by chromatography.
- Pharmaceutical Dissolution Prep - Clarifies dissolution medium samples in acidic aqueous and buffered media as a prefilter for HPLC assay.
- Paint and Coatings Analysis - Filters solvent-borne paint and resin solutions for HPLC and GC compositional and additive content measurement.
- Mining Acid Leachate Analysis - Processes dilute sulfuric acid mine drainage and leachate samples for dissolved metal and ion speciation analysis.
- Prefiltration Support - Protects downstream membrane filters by capturing gross contaminants, extending the purification system life.
- Biopharma Prefiltration - Removes large particulates from fermentation and upstream bioprocess streams ahead of membrane filtration steps.