Tisch Scientific Polypropylene (PP) Syringe Filters, 3 µm, 25 mm, 100/Pk - SPEC18190
Tisch Scientific makes the ordering process straightforward, turning around requests for pricing and product information fast. Syringe filters span a wide range of membrane chemistries and pore sizes, so the format can be matched to the sample matrix and solvent system in use. Hydrophobic polypropylene suits solvent and non-aqueous sample streams while keeping binding low and capturing particulates through its depth and resists a broad range of organic solvents, acids, and bases. Thermal-bonded PP construction leaves no seam for sample to bypass the membrane while routing flow to minimize backpressure in service and delivers a chemically clean filtrate to the downstream step. For routine sample preparation across many methods, each analytical run starts with a consistent, particle-free sample without added hardware or a cleaning step.
Membrane Characteristics
- Captures coarse particles near the surface and fine particles deeper within
- Operating pressure reaches 72 psi with a burst rating near 116 psi
- Compatible with dilute acids, ketones, and aliphatic esters at room temperature
- Halogen-free composition avoids hazardous fluorine byproducts during incineration
- Metal-ion leaching resistance holds during acid-digested sample filtration
Housing Characteristics
- Minimal extractable release from the housing supports sensitive analytical work downstream
- Inert polyolefin wall contributes minimal sample adsorption to the filtrate
- The seal formed against the membrane blocks bypass at rated operating pressure
- Minimal intrinsic autofluorescence from the polypropylene housing supports background-sensitive fluorescence-based assay work downstream
An aggressive solvent can leach or break down a vulnerable filter and carry debris into your prep. Solvent-stream filtration handles the solvents and reagents your methods rely on from initial prep through final use. Request volume pricing and stock availability on your filtration product selection from the Tisch Scientific team.
Sterilization Guidance
Customer autoclave compatibility at 121°C accommodates in-lab sterilization timing.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- NA
- Burst Pressure (psi)
- 116psi
- Connection Type
- Double Luer Lock
- Construction
- Polypropylene (PP)
- Diameter
- 25mm
- Dimensions (W x D x H)
- 21.8mmx28.6mm
- Filtration Area
- 4.9 cm²
- Material
- Polypropylene (PP)
- Maximum Operating Pressure
- 72.5psi
- Maximum Operating Temperature (°C)
- 80℃
- Pack Count
- 100
- Pore Size (µm)
- 3.0
- Sterility
- Nonsterile
- Weight
- 0.58
- Wettability
- Hydrophobic
- Injector Port Protection - Removes cell debris and protein precipitates before injection, guarding HPLC and GC autosampler needles from wear.
- Hormone and Steroid Testing - Handles alcohol and acetonitrile steroid extraction matrices for HPLC-MS confirmation in pharmaceutical QC labs.
- Diesel and Biodiesel Analysis - Filters fuel samples in alcohol and aliphatic solvent matrices for ASTM method compositional and purity testing.
- Metal Plating Bath Testing - Filters acidic plating bath solutions for ICP-OES and voltammetric quantitation of metal ion concentrations.
- Rubber Compound Testing - Filters cyclohexane and alcohol rubber extract solutions for antioxidant and additive content analysis by chromatography.
- Mineral Acid Compatibility - Withstands concentrated hydrochloric acid and strong caustic bases in aqueous inorganic extraction workflows.