Tisch Scientific Polypropylene (PP) Syringe Filters, 1 µm, 25 mm, 100/Pk - SPEC18194
Tisch Scientific vets its filtration partners carefully, favoring those with a consistent record of dependable output. Because each syringe filter is dedicated to one sample, a failed or contaminated filtration stays isolated to its own analyst's run and leaves the next analyst's queue clear. The hydrophobic polypropylene matrix repels water in vent and solvent service while delivering nominal retention with high dirt-loading capacity and resists a broad range of organic solvents, acids, and bases. The polypropylene housing presses snugly against the membrane during the pass while resisting degradation from routine sample matrices and preserves sample chemistry across the flow path. For routine sample preparation across many methods, each analytical run starts with a consistent, particle-free sample without added hardware or a cleaning step.
Membrane Characteristics
- Compatible with dilute acids, ketones, and aliphatic esters at room temperature
- Nominal depth matrix distributes particulate load progressively through the medium volume
- Dense polypropylene fiber network intercepts fine particles through the full medium depth
- Metal-ion leaching resistance holds during acid-digested sample filtration
- Sustains continuous operation at temperatures up to 80°C
Housing Characteristics
- Standardized luer connection geometry provides secure engagement with standard syringe tips
- PP housing supplied sterile in individual packaging for immediate use in aseptic filtration without bench preparation
- The seal formed against the membrane blocks bypass at rated operating pressure
- Stable across the full aqueous pH range in routine sample work
An aggressive solvent can leach or break down a vulnerable filter and carry debris into your prep. Solvent-stream filtration handles the solvents and reagents your methods rely on from initial prep through final use. Contact Tisch Scientific for a quote, lead time, or stock-on-hand check on your filtration product selection.
Sterilization Guidance
Sterile single-use packaging removes any in-lab sterilization preparation step.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- NA
- Burst Pressure (psi)
- 116psi
- Connection Type
- Double Luer Lock
- Construction
- Polypropylene (PP)
- Diameter
- 25mm
- Dimensions (W x D x H)
- 21.8mmx28.6mm
- Filtration Area
- 4.9cm²
- Material
- Polypropylene (PP)
- Maximum Operating Pressure
- 72.5psi
- Maximum Operating Temperature (°C)
- 80℃
- Pack Count
- 100
- Pore Size (µm)
- 1.0
- Sterility
- Sterile
- Weight
- 0.70
- Wettability
- Hydrophobic
- Injector Port Protection - Removes cell debris and protein precipitates before injection, guarding HPLC and GC autosampler needles from wear.
- Alcohol Solution Filtration - Clarifies methanol, ethanol, and isopropanol solutions for HPLC and GC analysis without swelling.
- Biopharma Prefiltration - Removes large particulates from fermentation and upstream bioprocess streams ahead of membrane filtration steps.
- Diesel and Biodiesel Analysis - Filters fuel samples in alcohol and aliphatic solvent matrices for ASTM method compositional and purity testing.
- Lubricant Sample Prep - Filters petroleum-based and synthetic lubricant samples in aliphatic solvent media for ISO cleanliness and wear analysis.
- Flavor and Fragrance Prep - Handles alcohol-based flavor and fragrance concentrate preparations before GC-MS aroma compound profiling.