Tisch
Polypropylene Syringe Filters, 3.0um, 20mm, Thrd Dbl Luer Lock, ABS Hsg, Nonsterile, 100/Pk SKU: SPEC18200

Polypropylene (PP) Syringe Filters - SPEC18200

Processing heavily contaminated organic solvent samples requires efficient coarse particle removal to protect downstream equipment and analytical instrumentation. Hydrophobic polypropylene at 3.0 µm pore size in 20mm format solves this problem by delivering rapid debris removal for routine sample volumes. The large pore opening handles high-particulate samples that would overwhelm finer membranes, protecting downstream equipment effectively. Your workflows benefit from chemical compatibility across aggressive solvents combined with the efficient particulate removal that prevents premature fouling of secondary filtration stages.

Key Membrane Characteristics

• 3.0 µm hydrophobic polypropylene membrane removes coarse debris efficiently from heavily contaminated organic solvent samples
• 20mm diameter compact configuration handles routine sample volumes efficiently during prefiltration operations
• Hydrophobic surface properties naturally resist aqueous contamination while permitting organic solvents and non-polar compounds to flow
• Maximum operating pressure of 72.5 psi with 116 psi burst rating handles viscous samples and high-particulate matrices safely
• Temperature capability to 80°C accommodates warm solvent filtration and elevated temperature processing applications

Key Construction Characteristics

• ABS housing construction provides a durable enclosure with chemical resistance suitable for organic solvent prefiltration operations
• Double luer lock connections secure syringes during filtration of pressurized samples, preventing disconnection under operating conditions
• 20mm diameter format provides practical throughput for routine prefiltration of organic solvent samples
• Nonsterile supply allows you to apply sterilization methods when your protocols require sterile operation

Your nonsterile filters accommodate sterilization when required for integration into laboratory protocols. The 3.0 µm pore size enables rapid processing of heavily particulate samples while the 20mm diameter provides practical filtration capacity for routine sample volumes. Each filter combines hydrophobic polypropylene's chemical resistance with efficient coarse particle removal, delivering reliable prefiltration performance for diverse organic solvent applications in analytical laboratories.

For more information about chemical and material compatibility, please review our Chemical Compatibility Chart.

Bubble Point (psi)

NA

Burst Pressure (psi)

116psi

Connection Type

Double Luer Lock

Construction

Acrylonitrile Butadiene Styrene (ABS)

Diameter

20mm

Dimensions (W x D x H)

23mmx25.2mm

Material

Polypropylene (PP)

Maximum Operating Pressure

72.5psi

Maximum Operating Temperature (°C)

80℃

Pack Count

100

Pore Size (µm)

3

Sterility

Nonsterile

Weight

0.60

Wetability

Hydrophobic

• Heavy Particulate Prefiltration - Initial debris removal from contaminated organic samples, protecting finer filtration stages effectively
• Routine Laboratory Operations - Coarse clarification for typical organic solvent samples requiring efficient particulate removal
• Viscous Solvent Processing - Prefiltration of thick organic solutions where smaller pores would create excessive pressure buildup
• Sample Screening - Rapid initial filtration of unknown organic samples to protect expensive analytical equipment from fouling
• Coating Formulation Analysis - Removing large aggregates from solvent-based coatings before particle size characterization
• Natural Extract Processing - First-stage cleanup of botanical extracts in organic solvents before secondary purification steps