Tisch Scientific PTFE Syringe Filters, 0.45 µm, 4 mm, 200/Pk - SF17507
Tisch Scientific vets its filtration partners carefully, favoring those with a consistent record of dependable output. Individually packaged and pre-tested, a syringe filter needs no functional check before use the way a shared reusable holder does. The treated PTFE membrane combines aqueous wetting with broad solvent resistance while withstanding aggressive organics that degrade other media and filters aggressive organic solvents without breakdown. Low-extractable polypropylene keeps sample purity intact through the filtration pass while pressing snugly against the membrane during the pass and maintains a low-dead-volume internal flow path. When method reproducibility rests on consistent sample prep, syringe filtration holds that standard injection after injection.
Membrane Characteristics
- Stable across a wide operating temperature range for demanding methods
- High membrane porosity, 70 to 80 percent void volume, delivers high flow at low pressure
- UL 94 V-0 rating confirms the highest self-extinguishing classification
- Node-fibril microstructure resists compaction under sustained operating pressure
- Low extractables keep the chromatographic background clean
Housing Characteristics
- Minimal intrinsic autofluorescence from the polypropylene housing supports background-sensitive fluorescence-based assay work downstream
- Polypropylene housing tolerates dilute aqueous acids, bases, and alcohols used in routine sample prep
- Inert polyolefin wall contributes minimal sample adsorption to the filtrate
- Burst pressure rating provides a wide safety margin above the rated maximum operating pressure
Juggling several filter types for one routine clarification eats up your bench time. General-purpose aqueous filtration supports the sample types you handle every day so you can standardize one filter across most aqueous methods. Start a live chat with the Tisch Scientific team for real-time updates on product availability, lead time, or your order status.
Sterilization Guidance
Standard autoclave cycles at 121°C for 30 minutes prepare the device for sterile workflows.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 21.75psi
- Burst Pressure (psi)
- 87psi.
- Connection Type
- Luer-Lok/Luer Slip
- Construction
- PP
- Diameter
- 4mm
- Filtration Area
- 0.125cm²
- Flow Rate
- 1.5ml
- Holdup Volume
- 1μL
- Incompatibility
- Bases, esters, ethers, ketones
- Material
- Polytetrafluoroethylene (PTFE)
- Maximum Operating Pressure
- 87psi
- Maximum Operating Temperature (°C)
- 60°C
- Membrane Thickness (µm)
- 80-140μm
- Pack Count
- 200
- Pore Size (µm)
- 0.45
- Prefilter (Yes/No)
- Yes
- Prefilter Material
- PP
- Sterility
- NonSterile
- Sterilization
- Autoclave 121°C for 30min/ Gamma 25kGy
- Volume Throughput (ml)
- 1ml
- Weight
- 0.24
- Wettability
- Hydrophilic
- Cryogenic Fluids - Delivers consistent performance across extreme temperature ranges, filtering cryogenic liquids with dependable, reliable results.
- Agrochemical Formulation QC - Clarifies technical pesticide concentrates in organic solvent ahead of HPLC potency and impurity analysis.
- Photoresist Filtration - Clarifies photoresist solutions in organic casting solvent ahead of spin-coating, reducing particulate defect risk.
- Mobile Phase Prep - Extends column life by consistently removing particulates from organic HPLC mobile phases before every injection.
- Chemical Synthesis - Resists aggressive organic solvents and corrosive acids for compatibility with harsh synthetic reaction mixtures.
- Battery Electrolyte Prep - Clarifies lithium-ion battery electrolyte in carbonate solvents ahead of GC-MS purity and impurity analysis.