Tisch Scientific PTFE Syringe Filters, 0.45 µm, 25 mm, 100/Pk - SF18250
Tisch Scientific makes the ordering process straightforward, turning around requests for pricing and product information fast. Because each syringe filter is dedicated to one sample, a failed or contaminated filtration stays isolated to its own analyst's run and leaves the next analyst's queue clear. The PTFE membrane withstands aggressive organics that degrade other media while handling concentrated acids and strong bases and excludes particles larger than the declared micron limit. Pre-sterilized polypropylene construction is individually wrapped for direct use in sterile workflows while holding its seal true run after run and resists degradation from routine sample matrices. When method reproducibility rests on consistent sample prep, syringe filtration holds that standard injection after injection.
Membrane Characteristics
- Biological inertness resists enzymatic attack from proteases and lipases
- Hydrofluoric acid resistance holds even in fully acid-digested samples
- Strong oxidizing agents like nascent chlorine and concentrated sodium hydroxide cause no attack
- Inert composition offers no nutrient source for microbial growth
- Low non-specific protein binding preserves recovery of biomolecules and therapeutic proteins during filtration
Housing Characteristics
- Rigid polypropylene body maintains its geometry through routine filtration pressure
- Minimal ionic background from the polypropylene housing supports ion chromatography and trace-metal ICP-MS sample preparation
- The seal formed against the membrane blocks bypass at rated operating pressure
- Each housing is factory-sterilized and sealed individually to maintain sterility through the supply chain
Juggling several filter types for one routine clarification eats up your bench time. Consistent aqueous clarification clears particulates without slowing your bench routine from the first sample of the day through the last. Request comparable filtration options that may offer cost savings for your order from the Tisch Scientific team.
Sterilization Guidance
Sterile single-use packaging removes any in-lab sterilization preparation step.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 21.75psi
- Burst Pressure (psi)
- 87psi.
- Connection Type
- Luer-Lok/Luer Slip
- Construction
- PP
- Diameter
- 25mm
- Filtration Area
- 4.08cm²
- Flow Rate
- 35ml
- Holdup Volume
- 100μL
- Incompatibility
- Bases, esters, ethers, ketones
- Material
- Polytetrafluoroethylene (PTFE)
- Maximum Operating Pressure
- 87psi
- Maximum Operating Temperature (°C)
- 60°C
- Membrane Thickness (µm)
- 80-140μm
- Pack Count
- 100
- Pore Size (µm)
- 0.45
- Prefilter (Yes/No)
- Yes
- Prefilter Material
- PP
- Sterility
- Sterile
- Volume Throughput (ml)
- 50ml
- Weight
- 0.88
- Wettability
- Hydrophilic
- Mobile Phase Prep - Extends column life by consistently removing particulates from organic HPLC mobile phases before every injection.
- Air Monitoring - Ensures precise capture of airborne particulates for environmental analysis in demanding atmospheric monitoring conditions.
- Fuel Analysis Prep - Clarifies gasoline and other petroleum samples ahead of gas chromatography, protecting injector ports from residue buildup.
- Aggressive Solvents - Clarifies chlorinated hydrocarbons and aromatics without membrane degradation, delivering pure filtrate quality consistently.
- Extractables Testing - Clarifies packaging material organic solvent extracts ahead of LC-MS analysis, keeping background low for leachable detection.
- Agrochemical Formulation QC - Clarifies technical pesticide concentrates in organic solvent ahead of HPLC potency and impurity analysis.