Your Cart (0)
Thumbnail Filmstrip of PTFE Membrane Filters, 1.0um, 142mm, Nonsterile, 50/Pk Images
Product Details
The polypropylene grid support material and the PTFE membrane makeup of these filters make them resistant to acidic solvents, alkali solvents, and chemically caustic material. The carbon-fluorine bonds in the membrane are incredibly strong, making them generally non-reactive and useful in an array of applications. Because they are hydrophobic by design, they can even filter aqueous aerosols effectively.
These replacement filters come in packs of 50 and can be used as replacements or refills for your 142 mm syringe filter housings, saving you money over time.
Product Uses & Filtration Applications
- Organic Solvents with Strong Chemical Causticity
- Strong Acidity Solvent Filtration
- Alcohols
- Alkali Solvent Filtration
- Aromatics
- Venting Applications
Product Support Documents
Need Help Determining the Appropriate Membrane Filter to Use?
Check Out These Additional Resources:
| PRODUCT SPEC TABLE | |
|---|---|
| Tisch Product Code | SF15132 |
| Filtration Area | 158.3 cm^2 |
| Wettability | Hydrophobic |
| Pore Size | 1.0 µm |
| Filter Size | 142 mm |
| Membrane Thickness | 140-190 µm |
| Substrate | Polypropylene |
| Maximum Operating Temperature | 123° C |
| Bubble Point | 4.35 psi |
| Burst Pressure | 87 psi |
| Flow Rate | 25 ml/min @10 psi |
| Sterility | Nonsterile |
| Sterilization | Autoclave: 121° C for 30 Minutes Gamma: 5kg, for 8 Hours |
| Pack Size | 50 |
| Incompatible With | Aqueous Samples Without Rewetting. |
- Diameter
- 142mm
- Material
- Polytetrafluoroethylene (PTFE)
- Pack Count
- 50
- Pore Size (µm)
- 1
- Sterility
- Nonsterile
- Wetability
- Hydrophobic