Chat with us, powered by LiveChat

Secure Checkout
PTFE Syringe Filters, 0.22 um, 13mm, Luer-Lok/Luer Slip, Sterile, 100/Pk

Thumbnail Filmstrip of PTFE Syringe Filters, 0.22 um, 13mm, Luer-Lok/Luer Slip, Sterile, 100/Pk Images

    Purchase PTFE Syringe Filters, 0.22 um, 13mm, Luer-Lok/Luer Slip, Sterile, 100/Pk

    PTFE Syringe Filters, 0.22 um, 13mm, Luer-Lok/Luer Slip, Sterile, 100/Pk
    Tisch SKU: SF14472

    $150.99
    Only 20 in stock. Order now!
     

    Tisch Scientific PTFE Syringe Filters, 0.22 µm, 13 mm, 100/Pk - SF14472

    Tisch Scientific reduces per-unit costs for laboratories that place blanket purchase agreements or large-quantity orders. A single-use hydrophobic vent filter reaches sterilizing-grade retention on a vent line without the autoclave cycle or in-line housing a reusable gas filtration setup would require. Chemically inert PTFE resists attack from the harshest process chemistries while delivering sterilizing-grade gas and vent filtration and handles concentrated acids and bases. The PP housing is factory-sterilized and individually wrapped for aseptic sample preparation while leaving no seam for sample to bypass the membrane and stays inert across common laboratory solvents. No separate sterilization cycle is needed when the gas path already runs through a validated sterile-grade membrane.

    Membrane Characteristics

    • Ionic and metallic extractable levels stay very low
    • Fully fluorinated carbon backbone resists ultraviolet and ozone degradation
    • Water contact angle near 120 degrees marks strong hydrophobicity
    • Inert composition offers no nutrient source for microbial growth
    • High porosity minimizes hold-up volume for small sample volumes

    Housing Characteristics

    • Withstands ethylene oxide gas sterilization without embrittlement or structural damage
    • Withstands standard 121°C steam autoclave cycles without softening or structural distortion
    • Resists stress cracking from aqueous salt and buffer solutions
    • Minimal extractable release from the housing supports sensitive analytical work downstream

    Particulates left in your organic solvents and reagents carry downstream into the step that depends on a clean feed. Solvent-stream filtration handles the solvents and reagents your methods rely on across the organic solvents and harsh reagents your methods use. Request details on payment terms or standing-order arrangements for your routine filtration purchases.

    Sterilization Guidance

    The device arrives factory sterile and is intended for single-use sample preparation.

    For more information about chemical compatibility, please review our Chemical Compatibility Chart.

    Bubble Point (psi)
    17.4(absolute ethyl alcohol )
    Burst Pressure (psi)
    87psi.
    Connection Type
    Luer-Lok/Luer Slip
    Construction
    PP
    Diameter
    13mm
    Filtration Area
    1.09cm²
    Flow Rate
    5.5ml
    Holdup Volume
    10μL
    Incompatibility
    Aqueous samples without rewetting
    Material
    Polytetrafluoroethylene (PTFE)
    Maximum Operating Pressure
    87psi
    Maximum Operating Temperature (°C)
    60°C
    Membrane Thickness (µm)
    80-140μm
    Pack Count
    100
    Pore Size (µm)
    0.22
    Sterility
    Sterile
    Volume Throughput (ml)
    10ml
    Weight
    0.19
    Wettability
    Hydrophobic
    • Agrochemical Formulation QC - Clarifies technical pesticide concentrates in organic solvent ahead of HPLC potency and impurity analysis.
    • Dye and Pigment Analysis - Clarifies dye solutions in DMF, NMP, and other aggressive organics ahead of spectrophotometric color strength testing.
    • Chemical Synthesis - Resists aggressive organic solvents and corrosive acids for compatibility with harsh synthetic reaction mixtures.
    • Air Monitoring - Ensures precise capture of airborne particulates for environmental analysis in demanding atmospheric monitoring conditions.
    • Cryogenic Fluids - Delivers consistent performance across extreme temperature ranges, filtering cryogenic liquids with dependable, reliable results.
    • Polymer GPC Prep - Clarifies polymer solutions in THF ahead of gel permeation chromatography, protecting columns from particulates.