Tisch Scientific PTFE Syringe Filters, 0.45 µm, 25 mm, 100/Pk - SF14475
Tisch Scientific makes the ordering process straightforward, turning around requests for pricing and product information fast. A syringe filter dispenses filtrate directly into an autosampler vial, without the intermediate collection vessel a bulk vacuum filtration setup typically needs. PTFE filters aggressive organic solvents without swelling or breakdown and reaches the same absolute retention on every run. Pre-sterilized polypropylene construction is individually wrapped for direct use in sterile workflows while leaving no seam for sample to bypass the membrane and sheds virtually no extractable material into the sample. Where analytical results depend on clean samples, the preparation step stays consistent from sample to sample through a pre-tested syringe filter.
Membrane Characteristics
- UL 94 V-0 rating confirms the highest self-extinguishing classification
- Strong oxidizing agents like nascent chlorine and concentrated sodium hydroxide cause no attack
- Gas-venting and liquid-blocking function survives repeated autoclave sterilization cycles
- Ionic and metallic extractable levels stay very low
- Non-wetting pore surface blocks liquid water while passing water vapor freely
Housing Characteristics
- Thermal-bonded construction keeps adhesives out of the fluid path
- Impact-tolerant polypropylene body withstands routine bench handling without damage
- Rigid polypropylene body maintains its geometry through routine filtration pressure
- PP housing supplied sterile in individual packaging for immediate use in aseptic filtration without bench preparation
A filter that softens or swells in your solvent fails you mid-run, batch after batch. Solvent-stream filtration handles the solvents and reagents your methods rely on across the organic solvents and harsh reagents your methods use. Request available pack sizes and lead times across this filtration line's membrane options from the Tisch Scientific team.
Sterilization Guidance
Sterile single-use packaging removes any in-lab sterilization preparation step.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 7.25(absolute ethyl alcohol )
- Burst Pressure (psi)
- 87psi.
- Connection Type
- Luer-Lok/Luer Slip
- Construction
- PP
- Diameter
- 25mm
- Filtration Area
- 4.08cm²
- Flow Rate
- 35ml
- Holdup Volume
- 100μL
- Incompatibility
- Aqueous samples without rewetting
- Material
- Polytetrafluoroethylene (PTFE)
- Maximum Operating Pressure
- 87psi
- Maximum Operating Temperature (°C)
- 60°C
- Membrane Thickness (µm)
- 80-140μm
- Pack Count
- 100
- Pore Size (µm)
- 0.45
- Sterility
- Sterile
- Volume Throughput (ml)
- 100ml
- Weight
- 0.88
- Wettability
- Hydrophobic
- Photoresist Filtration - Clarifies photoresist solutions in organic casting solvent ahead of spin-coating, reducing particulate defect risk.
- Extractables Testing - Clarifies packaging material organic solvent extracts ahead of LC-MS analysis, keeping background low for leachable detection.
- Spirits Congener Analysis - Clarifies distilled spirits samples ahead of GC analysis, protecting columns from residue during congener profiling.
- Air Monitoring - Ensures precise capture of airborne particulates for environmental analysis in demanding atmospheric monitoring conditions.
- Toxicology Screening - Clarifies protein-precipitated serum, plasma, and urine extracts ahead of LC-MS or GC-MS drug screening analysis.
- Trace Metals Analysis - PTFE's low metal-extractable profile clarifies acid-digested samples for clean, low-background ICP-MS and ICP-OES results.