Tisch Scientific PTFE Syringe Filters, 0.45 µm, 33 mm, 100/Pk - SF14477
Tisch Scientific reduces per-unit costs for laboratories that place blanket purchase agreements or large-quantity orders. Syringe filters replace the separate holder and vacuum apparatus of bulk filtration with a single disposable unit, eliminating cleaning between samples. PTFE stays chemically inert against aggressive solvents, strong acids, and alkalis in service while removing particles with absolute precision at each stated micron rating and handles concentrated acids and bases. The polypropylene housing routes flow to minimize backpressure in service while shipping pre-sterilized and sealed for direct use in aseptic workflows and stands firm against aqueous acids, bases, and alcohols during regular handling. For routine sample preparation across many methods, each analytical run starts with a consistent, particle-free sample without added hardware or a cleaning step.
Membrane Characteristics
- Surface energy near 18.5 dynes per centimeter repels oils and nonpolar liquids
- Hydrofluoric acid resistance holds even in fully acid-digested samples
- Biological inertness resists enzymatic attack from proteases and lipases
- Low non-specific protein binding preserves recovery of biomolecules and therapeutic proteins during filtration
- Gas-venting and liquid-blocking function survives repeated autoclave sterilization cycles
Housing Characteristics
- Each housing is factory-sterilized and sealed individually to maintain sterility through the supply chain
- Housing rated for reliable filtration under syringe-applied backpressure at its maximum operating pressure
- Low moisture absorption keeps the housing dimensionally stable through humid storage and shipping
- Inert polyolefin wall contributes minimal sample adsorption to the filtrate
An aggressive solvent can leach or break down a vulnerable filter and carry debris into your prep. Solvent-stream filtration handles the solvents and reagents your methods rely on so your filter holds its integrity through the run. Request volume pricing and stock availability on your filtration product selection from the Tisch Scientific team.
Sterilization Guidance
Sterile single-use packaging removes any in-lab sterilization preparation step.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 7.25psi (absolute ethyl alcohol)
- Burst Pressure (psi)
- 87psi.
- Connection Type
- Luer-Lok/Luer Slip
- Construction
- PP
- Diameter
- 33mm
- Filtration Area
- 4.9cm²
- Flow Rate
- 59ml
- Holdup Volume
- 100μL
- Incompatibility
- Aqueous samples without rewetting
- Material
- Polytetrafluoroethylene (PTFE)
- Maximum Operating Pressure
- 87psi
- Maximum Operating Temperature (°C)
- 60°C
- Membrane Thickness (µm)
- 80-140μm
- Pack Count
- 100
- Pore Size (µm)
- 0.45
- Sterility
- Sterile
- Volume Throughput (ml)
- 120ml
- Weight
- 1.46
- Wettability
- Hydrophobic
- Toxicology Screening - Clarifies protein-precipitated serum, plasma, and urine extracts ahead of LC-MS or GC-MS drug screening analysis.
- Dissolution Testing - Stops the dissolution reaction and clarifies samples, with low API binding for accurate potency quantitation.
- Cryogenic Fluids - Delivers consistent performance across extreme temperature ranges, filtering cryogenic liquids with dependable, reliable results.
- Extractables Testing - Clarifies packaging material organic solvent extracts ahead of LC-MS analysis, keeping background low for leachable detection.
- Chemical Synthesis - Resists aggressive organic solvents and corrosive acids for compatibility with harsh synthetic reaction mixtures.
- Agrochemical Formulation QC - Clarifies technical pesticide concentrates in organic solvent ahead of HPLC potency and impurity analysis.