Tisch Scientific PTFE Syringe Filters, 0.22 µm, 4 mm, 100/Pk - SF17506
Tisch Scientific's sales team brings fast, courteous service to every filtration order, from first quote through fulfillment. A sterilizing-grade syringe filter delivers point-of-use sterile filtration in a single-use format, without the housing and gasket maintenance a reusable stainless steel filter holder requires. Treated PTFE delivers sterilizing-grade liquid retention at the rated pore size while filtering aggressive organic solvents without breakdown and combines aqueous wetting with broad solvent resistance. Polypropylene construction maintains a low-dead-volume internal flow path while shedding virtually no extractable material into the sample and resists degradation from routine sample matrices. When sample preparation calls for a sterile filtrate at the point of injection, sterilizing-grade absolute retention delivers it directly, protecting the analytical method from microbial interference.
Membrane Characteristics
- Chemical resistance spans the full pH 1 to 14 range
- Validated against a liquid suspension Brevundimonas diminuta challenge at 10 million CFU per square centimeter
- Ionic and metallic extractable levels stay very low
- Insolubility in all known organic solvents avoids swelling and pore distortion
- Low extractables keep the chromatographic background clean
Housing Characteristics
- Minimal intrinsic autofluorescence from the polypropylene housing supports background-sensitive fluorescence-based assay work downstream
- Impact-tolerant polypropylene body withstands routine bench handling without damage
- Housing rated for reliable filtration under syringe-applied backpressure at its maximum operating pressure
- Medical-grade polypropylene with broad chemical compatibility
Juggling several filter types for one routine clarification eats up your bench time. Consistent aqueous clarification clears particulates without slowing your bench routine the same way every time you run it. Start a live chat with the Tisch Scientific team about packaging, unit count, and ship-date for your filtration order.
Sterilization Guidance
Standard autoclave cycles at 121°C for 30 minutes prepare the device for sterile workflows.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 43.51psi
- Burst Pressure (psi)
- 87psi.
- Connection Type
- Luer-Lok/Luer Slip
- Construction
- Polypropylene (PP)
- Diameter
- 4mm
- Filtration Area
- 0.125cm²
- Flow Rate
- 0.7ml/ min @ 10psi.
- Holdup Volume
- 1µL
- Material
- Polytetrafluoroethylene (PTFE)
- Maximum Operating Temperature (°C)
- 60°C
- Membrane Thickness (µm)
- 80-140μm
- Pack Count
- 100
- Pore Size (µm)
- 0.22
- Prefilter (Yes/No)
- Yes
- Prefilter Material
- Polypropylene (PP)
- Sterility
- Nonsterile
- Sterilization
- Autoclave: 121°C for 30 minutes/ Gamma: 25kGy
- Volume Throughput (ml)
- 1ml
- Weight
- 0.24
- Wettability
- Hydrophilic
- Aggressive Solvents - Clarifies chlorinated hydrocarbons and aromatics without membrane degradation, delivering pure filtrate quality consistently.
- Polymer GPC Prep - Clarifies polymer solutions in THF ahead of gel permeation chromatography, protecting columns from particulates.
- Fuel Analysis Prep - Clarifies gasoline and other petroleum samples ahead of gas chromatography, protecting injector ports from residue buildup.
- Dye and Pigment Analysis - Clarifies dye solutions in DMF, NMP, and other aggressive organics ahead of spectrophotometric color strength testing.
- Dissolution Testing - Stops the dissolution reaction and clarifies samples, with low API binding for accurate potency quantitation.
- Toxicology Screening - Clarifies protein-precipitated serum, plasma, and urine extracts ahead of LC-MS or GC-MS drug screening analysis.