Tisch Scientific PTFE Syringe Filters, 0.45 µm, 13 mm, 100/Pk - SF18010
Tisch Scientific reduces per-unit costs for laboratories that place blanket purchase agreements or large-quantity orders. Because each syringe filter is dedicated to one sample, a failed or contaminated filtration stays isolated to its own analyst's run and leaves the next analyst's queue clear. PTFE filters aggressive organic solvents without swelling or breakdown while maintaining absolute retention consistency at every rated size and accepts aqueous samples without alcohol pre-wetting. Polypropylene housing is factory-sterilized and packaged to preserve that state until use while standing firm against aqueous acids, bases, and alcohols during regular handling and delivers a chemically clean filtrate to the downstream step. For routine sample preparation across many methods, each analytical run starts with a consistent, particle-free sample without added hardware or a cleaning step.
Membrane Characteristics
- Low extractables keep the chromatographic background clean
- High porosity minimizes hold-up volume for small sample volumes
- Biological inertness resists enzymatic attack from proteases and lipases
- Aqueous buffers and HPLC mobile phases wet the hydrophilic surface instantly
- Non-fibrous, fully synthetic structure sheds no fibers into filtrate
Housing Characteristics
- Impact-tolerant polypropylene body withstands routine bench handling without damage
- Resists stress cracking from aqueous salt and buffer solutions
- Polypropylene housing withstands rated backpressure from dense sample matrices without deformation
- The seal formed against the membrane blocks bypass at rated operating pressure
Particulates in your buffers, reagents, and aqueous samples slow your preparation and throw off its consistency. Consistent aqueous clarification clears particulates without slowing your bench routine across the buffers and reagents your day-to-day prep depends on. Request available pack sizes and lead times across this filtration line's membrane options from the Tisch Scientific team.
Sterilization Guidance
The device arrives factory sterile and is intended for single-use sample preparation.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 21.75psi
- Burst Pressure (psi)
- 87psi.
- Connection Type
- Luer-Lok/Luer Slip
- Construction
- PP
- Diameter
- 13mm
- Filtration Area
- 1.09cm²
- Flow Rate
- 11ml
- Holdup Volume
- 10μL
- Incompatibility
- Bases, esters, ethers, ketones
- Material
- Polytetrafluoroethylene (PTFE)
- Maximum Operating Pressure
- 87psi
- Maximum Operating Temperature (°C)
- 60°C
- Membrane Thickness (µm)
- 80-140μm
- Pack Count
- 100
- Pore Size (µm)
- 0.45
- Prefilter (Yes/No)
- Yes
- Prefilter Material
- PP
- Sterility
- Sterile
- Volume Throughput (ml)
- 10ml
- Weight
- 0.40
- Wettability
- Hydrophilic
- Agrochemical Formulation QC - Clarifies technical pesticide concentrates in organic solvent ahead of HPLC potency and impurity analysis.
- Spirits Congener Analysis - Clarifies distilled spirits samples ahead of GC analysis, protecting columns from residue during congener profiling.
- Extractables Testing - Clarifies packaging material organic solvent extracts ahead of LC-MS analysis, keeping background low for leachable detection.
- Fuel Analysis Prep - Clarifies gasoline and other petroleum samples ahead of gas chromatography, protecting injector ports from residue buildup.
- Cryogenic Fluids - Delivers consistent performance across extreme temperature ranges, filtering cryogenic liquids with dependable, reliable results.
- Chemical Synthesis - Resists aggressive organic solvents and corrosive acids for compatibility with harsh synthetic reaction mixtures.