Tisch Scientific PTFE Syringe Filters, 1 µm, 25 mm, 100/Pk - SF18240
Tisch Scientific makes the ordering process straightforward, turning around requests for pricing and product information fast. Sample preparation for chromatography often ends with a syringe filter on the path to the vial. Hydrophobic PTFE blocks aqueous ingress in vent and gas applications while removing particles with absolute precision at each stated micron rating and stays chemically inert against solvents, acids, and alkalis. The polypropylene housing routes flow to minimize backpressure in service while resisting degradation from routine sample matrices and ships pre-sterilized with individual packaging for aseptic filtration workflows. When method reproducibility rests on consistent sample prep, syringe filtration holds that standard injection after injection.
Membrane Characteristics
- Water contact angle near 120 degrees marks strong hydrophobicity
- Low non-specific protein binding preserves recovery of biomolecules and therapeutic proteins during filtration
- Chemical resistance spans the full pH 1 to 14 range
- Solvent tolerance includes full-strength tetrahydrofuran and chlorinated solvents such as dichloromethane
- Membrane integrity holds across repeated autoclave sterilization cycles at 121°C to 134°C
Housing Characteristics
- Polypropylene housing tolerates dilute aqueous acids, bases, and alcohols used in routine sample prep
- Each housing is factory-sterilized and sealed individually to maintain sterility through the supply chain
- Rigid polypropylene body maintains its geometry through routine filtration pressure
- Withstands ethylene oxide gas sterilization without embrittlement or structural damage
An aggressive solvent can leach or break down a vulnerable filter and carry debris into your prep. Solvent-stream filtration handles the solvents and reagents your methods rely on so your filter holds its integrity through the run. Reach out to the Tisch Scientific team about minimum order quantities and shipping timelines for your filtration product selection.
Sterilization Guidance
The device arrives factory sterile and is intended for single-use sample preparation.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 4.35psi (absolute ethyl alcohol)
- Connection Type
- Luer-Lok/Luer Slip
- Construction
- Polypropylene (PP)
- Diameter
- 25mm
- Filtration Area
- 4.08cm²
- Flow Rate
- 70ml
- Holdup Volume
- 100μL
- Incompatibility
- Aqueous samples without rewetting
- Material
- Polytetrafluoroethylene (PTFE)
- Maximum Operating Pressure
- 87psi
- Maximum Operating Temperature (°C)
- 60°C
- Membrane Thickness (µm)
- 80-140μm
- Pack Count
- 100
- Pore Size (µm)
- 1.0
- Sterility
- Sterile
- Volume Throughput (ml)
- 100ml
- Weight
- 0.88
- Wettability
- Hydrophobic
- Pump Protection - Acts as a hydrophobic barrier that protects vacuum pumps from corrosive moisture and particulate damage.
- Air Monitoring - Ensures precise capture of airborne particulates for environmental analysis in demanding atmospheric monitoring conditions.
- Agrochemical Formulation QC - Clarifies technical pesticide concentrates in organic solvent ahead of HPLC potency and impurity analysis.
- Dissolution Testing - Stops the dissolution reaction and clarifies samples, with low API binding for accurate potency quantitation.
- Chemical Synthesis - Resists aggressive organic solvents and corrosive acids for compatibility with harsh synthetic reaction mixtures.
- Spirits Congener Analysis - Clarifies distilled spirits samples ahead of GC analysis, protecting columns from residue during congener profiling.