Tisch Scientific PTFE Syringe Filters, 0.22 µm, 25 mm, 100/Pk - SPEC18137
Tisch Scientific's sales team brings fast, courteous service to every filtration order, from first quote through fulfillment. A syringe filter with a hydrophobic vent-rated membrane keeps gas and vent lines free of microbial ingress. Hydrophobic PTFE repels water while passing gases and solvents freely and suits solvent filtration where other membranes fail. The PP housing sustains efficient flow on viscous samples while staying inert across common laboratory solvents and holds its seal true run after run. A vent or gas line stays free of airborne bacteria once a hydrophobic, sterilizing-grade membrane is in the path.
Membrane Characteristics
- Solvent tolerance includes full-strength tetrahydrofuran and chlorinated solvents such as dichloromethane
- Minimal moisture absorption pairs with a low tare mass
- High porosity minimizes hold-up volume for small sample volumes
- Validated against an aerosol Brevundimonas diminuta bacterial challenge
- Non-fibrous, fully synthetic structure sheds no fibers into filtrate
Housing Characteristics
- Standardized luer connection geometry provides secure engagement with standard syringe tips
- Minimal extractable release from the housing supports sensitive analytical work downstream
- Withstands ethylene oxide gas sterilization without embrittlement or structural damage
- Inert polyolefin wall contributes minimal sample adsorption to the filtrate
A filter that softens or swells in your solvent fails you mid-run, batch after batch. Solvent-stream filtration handles the solvents and reagents your methods rely on across the organic solvents and harsh reagents your methods use. Request available pack sizes and lead times across this filtration line's membrane options from the Tisch Scientific team.
Sterilization Guidance
Factory sterilization supports immediate use in workflows where sterility assurance matters.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 13psi
- Burst Pressure (psi)
- 116psi
- Connection Type
- Double Luer Lock
- Construction
- Polypropylene (PP)
- Diameter
- 25mm
- Filtration Area
- 4.08cm²
- Material
- Polytetrafluoroethylene (PTFE)
- Maximum Operating Pressure
- 72.5psi
- Maximum Operating Temperature (°C)
- 80℃
- Pack Count
- 100
- Pore Size (µm)
- 0.22
- Sterility
- Sterile
- Weight
- 0.70
- Wettability
- Hydrophobic
- Battery Electrolyte Prep - Clarifies lithium-ion battery electrolyte in carbonate solvents ahead of GC-MS purity and impurity analysis.
- Dissolution Testing - Stops the dissolution reaction and clarifies samples, with low API binding for accurate potency quantitation.
- Spirits Congener Analysis - Clarifies distilled spirits samples ahead of GC analysis, protecting columns from residue during congener profiling.
- Trace Metals Analysis - PTFE's low metal-extractable profile clarifies acid-digested samples for clean, low-background ICP-MS and ICP-OES results.
- Chemical Synthesis - Resists aggressive organic solvents and corrosive acids for compatibility with harsh synthetic reaction mixtures.
- Fuel Analysis Prep - Clarifies gasoline and other petroleum samples ahead of gas chromatography, protecting injector ports from residue buildup.