Tisch Scientific PTFE Syringe Filters, 0.22 µm, 20 mm, 100/Pk - SPEC18142
Tisch Scientific reduces per-unit costs for laboratories that place blanket purchase agreements or large-quantity orders. Gas and vent service calls for a hydrophobic syringe filter rated to the same sterilizing-grade pore size as its liquid counterpart. The PTFE matrix handles concentrated acids and bases across demanding methods and achieves sterile-grade retention in gas and vent service. The ABS housing resists aqueous acids, bases, and alcohols in routine use and carries high impact strength into a small device. No separate sterilization cycle is needed when the gas path already runs through a validated sterile-grade membrane.
Membrane Characteristics
- Absolute pore rating delivers reproducible retention across every protocol
- UL 94 V-0 rating confirms the highest self-extinguishing classification
- High membrane porosity, 70 to 80 percent void volume, delivers high flow at low pressure
- Fully fluorinated carbon backbone resists ultraviolet and ozone degradation
- Non-wetting pore surface blocks liquid water while passing water vapor freely
Housing Characteristics
- Housing integrity maintained at warm sample temperatures up to 80°C
- Opaque body shields light-sensitive samples during the pass
- ABS housing resists aqueous detergents and surfactants in cleaning-step protocols
- Low extractable content from the ABS housing keeps filtrate analytical cleanliness high
A filter that softens or swells in your solvent fails you mid-run, batch after batch. Solvent-stream filtration handles the solvents and reagents your methods rely on across the organic solvents and harsh reagents your methods use. Request available pack sizes and lead times across this filtration line's membrane options from the Tisch Scientific team.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 13psi
- Burst Pressure (psi)
- 116psi
- Connection Type
- Double Luer Lock
- Construction
- Acrylonitrile Butadiene Styrene (ABS)
- Diameter
- 20mm
- Filtration Area
- 3.1cm²
- Material
- Polytetrafluoroethylene (PTFE)
- Maximum Operating Pressure
- 72.5psi
- Maximum Operating Temperature (°C)
- 80℃
- Pack Count
- 100
- Pore Size (µm)
- 0.22
- Sterility
- Nonsterile
- Weight
- 0.60
- Wettability
- Hydrophobic
- Cryogenic Fluids - Delivers consistent performance across extreme temperature ranges, filtering cryogenic liquids with dependable, reliable results.
- Spirits Congener Analysis - Clarifies distilled spirits samples ahead of GC analysis, protecting columns from residue during congener profiling.
- Battery Electrolyte Prep - Clarifies lithium-ion battery electrolyte in carbonate solvents ahead of GC-MS purity and impurity analysis.
- Air Monitoring - Ensures precise capture of airborne particulates for environmental analysis in demanding atmospheric monitoring conditions.
- Trace Metals Analysis - PTFE's low metal-extractable profile clarifies acid-digested samples for clean, low-background ICP-MS and ICP-OES results.
- Extractables Testing - Clarifies packaging material organic solvent extracts ahead of LC-MS analysis, keeping background low for leachable detection.