Tisch Scientific PTFE Syringe Filters, 0.22 µm, 25 mm, 100/Pk - SPEC18152
Tisch Scientific vets its filtration partners carefully, favoring those with a consistent record of dependable output. At the sub-micron pore rating, a syringe filter delivers sterilizing-grade retention at the point of use. The PTFE matrix handles concentrated acids and bases across demanding methods while combining aqueous wetting with solvent resistance and stays chemically inert against solvents, acids, and alkalis. Polypropylene construction resists chemical degradation from routine sample matrices and leaves no seam for sample to bypass the membrane. When sample preparation calls for a sterile filtrate at the point of injection, sterilizing-grade absolute retention delivers it directly, protecting the analytical method from microbial interference.
Membrane Characteristics
- Aqueous buffers and HPLC mobile phases wet the hydrophilic surface instantly
- Node-fibril microstructure resists compaction under sustained operating pressure
- Validated against a liquid suspension Brevundimonas diminuta challenge at 10 million CFU per square centimeter
- Absolute pore rating delivers reproducible retention across every protocol
- Stable across a wide operating temperature range for demanding methods
Housing Characteristics
- Minimal intrinsic autofluorescence from the polypropylene housing supports background-sensitive fluorescence-based assay work downstream
- Stable across the full aqueous pH range in routine sample work
- Rigid polypropylene body maintains its geometry through routine filtration pressure
- Impact-tolerant polypropylene body withstands routine bench handling without damage
Particulates in your buffers and mobile phases shorten column life and unsettle your baselines. Upstream buffer clarification keeps your run from stalling on particulates that slipped through across routine and validated analytical methods. Request a quote on bulk pricing for larger filtration orders from the Tisch Scientific team.
Sterilization Guidance
Customer autoclave compatibility at 121°C accommodates in-lab sterilization timing.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 13psi
- Burst Pressure (psi)
- 116psi
- Connection Type
- Double Luer Lock
- Construction
- Polypropylene (PP)
- Diameter
- 25mm
- Filtration Area
- 4.9cm²
- Material
- Polytetrafluoroethylene (PTFE)
- Maximum Operating Pressure
- 72.5psi
- Maximum Operating Temperature (°C)
- 80℃
- Pack Count
- 100
- Pore Size (µm)
- 0.22
- Sterility
- Nonsterile
- Weight
- 0.58
- Wettability
- Hydrophilic
- Aggressive Solvents - Clarifies chlorinated hydrocarbons and aromatics without membrane degradation, delivering pure filtrate quality consistently.
- Fuel Analysis Prep - Clarifies gasoline and other petroleum samples ahead of gas chromatography, protecting injector ports from residue buildup.
- Toxicology Screening - Clarifies protein-precipitated serum, plasma, and urine extracts ahead of LC-MS or GC-MS drug screening analysis.
- Photoresist Filtration - Clarifies photoresist solutions in organic casting solvent ahead of spin-coating, reducing particulate defect risk.
- Air Monitoring - Ensures precise capture of airborne particulates for environmental analysis in demanding atmospheric monitoring conditions.
- Extractables Testing - Clarifies packaging material organic solvent extracts ahead of LC-MS analysis, keeping background low for leachable detection.