Tisch Scientific PTFE Syringe Filters, 0.22 µm, 20 mm, 100/Pk - SPEC18160
Tisch Scientific's sales team brings fast, courteous service to every filtration order, from first quote through fulfillment. At the sub-micron pore rating, a syringe filter delivers sterilizing-grade retention at the point of use. The PTFE membrane withstands aggressive organics that degrade other media while delivering sterilizing-grade liquid retention at sub-micron pore sizes and accepts aqueous samples without alcohol pre-wetting. The ABS body channels the full sample through the membrane, not around it and takes repeated handling without cracking. When sample preparation calls for a sterile filtrate at the point of injection, sterilizing-grade absolute retention delivers it directly, protecting the analytical method from microbial interference.
Membrane Characteristics
- High porosity minimizes hold-up volume for small sample volumes
- Insolubility in all known organic solvents avoids swelling and pore distortion
- Absolute pore rating delivers reproducible retention across every protocol
- High membrane porosity, 70 to 80 percent void volume, delivers high flow at low pressure
- Chemical resistance spans the full pH 1 to 14 range
Housing Characteristics
- Creep resistance at ambient temperature keeps the housing seal load stable over time
- The butadiene component of the terpolymer provides toughness and impact resistance
- Opaque body shields light-sensitive samples during the pass
- Low moisture absorption limits dimensional swelling during humid storage
Juggling several filter types for one routine clarification eats up your bench time. General-purpose aqueous filtration supports the sample types you handle every day so you can standardize one filter across most aqueous methods. Request comparable filtration options that may offer cost savings for your order from the Tisch Scientific team.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 13psi
- Burst Pressure (psi)
- 116psi
- Connection Type
- Double Luer Lock
- Construction
- Acrylonitrile Butadiene Styrene (ABS)
- Diameter
- 20mm
- Filtration Area
- 3.1cm²
- Material
- Polytetrafluoroethylene (PTFE)
- Maximum Operating Pressure
- 72.5psi
- Maximum Operating Temperature (°C)
- 80℃
- Pack Count
- 100
- Pore Size (µm)
- 0.22
- Sterility
- Nonsterile
- Weight
- 0.60
- Wettability
- Hydrophilic
- Extractables Testing - Clarifies packaging material organic solvent extracts ahead of LC-MS analysis, keeping background low for leachable detection.
- Chemical Synthesis - Resists aggressive organic solvents and corrosive acids for compatibility with harsh synthetic reaction mixtures.
- Battery Electrolyte Prep - Clarifies lithium-ion battery electrolyte in carbonate solvents ahead of GC-MS purity and impurity analysis.
- Photoresist Filtration - Clarifies photoresist solutions in organic casting solvent ahead of spin-coating, reducing particulate defect risk.
- Mobile Phase Prep - Extends column life by consistently removing particulates from organic HPLC mobile phases before every injection.
- Fuel Analysis Prep - Clarifies gasoline and other petroleum samples ahead of gas chromatography, protecting injector ports from residue buildup.