Tisch Scientific PTFE Syringe Filters, 0.22 µm, 20 mm, 100/Pk - SPEC18164
Tisch Scientific makes the ordering process straightforward, turning around requests for pricing and product information fast. At the sub-micron pore rating, a syringe filter delivers sterilizing-grade retention at the point of use. Treated PTFE delivers sterilizing-grade liquid retention at the rated pore size while accepting aqueous samples without alcohol pre-wetting and suits solvent filtration where other membranes fail. The ABS body channels the full sample through the membrane, not around it while taking repeated handling without cracking and holds up to aqueous samples and buffers. For workflows requiring validated sterile-grade performance, point-of-use retention meets it without a separate sterilization step.
Membrane Characteristics
- Low non-specific protein binding preserves recovery of biomolecules and therapeutic proteins during filtration
- Inert composition offers no nutrient source for microbial growth
- Solvent tolerance includes full-strength tetrahydrofuran and chlorinated solvents such as dichloromethane
- UL 94 V-0 rating confirms the highest self-extinguishing classification
- Validated against a liquid suspension Brevundimonas diminuta challenge at 10 million CFU per square centimeter
Housing Characteristics
- Impact-modified terpolymer absorbs bench drops without cracking
- ABS housing resists aqueous detergents and surfactants in cleaning-step protocols
- Housing-to-membrane seal keeps the sample from bypassing the membrane
- Low extractable content from the ABS housing keeps filtrate analytical cleanliness high
Particulates in your buffers, reagents, and aqueous samples slow your preparation and throw off its consistency. Consistent aqueous clarification clears particulates without slowing your bench routine the same way every time you run it. Request comparable filtration options that may offer cost savings for your order from the Tisch Scientific team.
Sterilization Guidance
Sterile single-use packaging removes any in-lab sterilization preparation step.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 13psi
- Burst Pressure (psi)
- 116psi
- Connection Type
- Double Luer Lock
- Construction
- Acrylonitrile Butadiene Styrene (ABS)
- Diameter
- 20mm
- Filtration Area
- 3.1cm²
- Material
- Polytetrafluoroethylene (PTFE)
- Maximum Operating Pressure
- 72.5psi
- Maximum Operating Temperature (°C)
- 80℃
- Pack Count
- 100
- Pore Size (µm)
- 0.22
- Sterility
- Sterile
- Weight
- 0.72
- Wettability
- Hydrophilic
- Extractables Testing - Clarifies packaging material organic solvent extracts ahead of LC-MS analysis, keeping background low for leachable detection.
- Air Monitoring - Ensures precise capture of airborne particulates for environmental analysis in demanding atmospheric monitoring conditions.
- Aggressive Solvents - Clarifies chlorinated hydrocarbons and aromatics without membrane degradation, delivering pure filtrate quality consistently.
- Mobile Phase Prep - Extends column life by consistently removing particulates from organic HPLC mobile phases before every injection.
- Photoresist Filtration - Clarifies photoresist solutions in organic casting solvent ahead of spin-coating, reducing particulate defect risk.
- Dye and Pigment Analysis - Clarifies dye solutions in DMF, NMP, and other aggressive organics ahead of spectrophotometric color strength testing.