Tisch Scientific PVDF Syringe Filters, 0.22 µm, 13 mm, 100/Pk - SF14460
Tisch Scientific vets its filtration partners carefully, favoring those with a consistent record of dependable output. A single-use hydrophobic vent filter reaches sterilizing-grade retention on a vent line without the autoclave cycle or in-line housing a reusable gas filtration setup would require. Hydrophobic PVDF passes gases freely while holding back water and blocks bacterial passage through its smallest rated openings. Polyolefin construction sheds virtually no extractable material into the sample while maintaining a low-dead-volume internal flow path and arrives factory-sterilized and individually sealed for sterile use. Downstream equipment and work areas stay protected from airborne bacterial contamination once the vent path runs through the membrane.
Membrane Characteristics
- Autoclave sterilization cycles leave pore structure and flow performance intact
- Vapor-phase hydrogen peroxide decontamination cycles leave the membrane intact
- Cast membrane structure releases no fibers, unlike depth-media prefilters
- Fluorinated polymer chemistry resists ozone, UV, and ionizing radiation
- Ethylene oxide sterilization cycles leave pore integrity and flow performance intact
Housing Characteristics
- Low moisture absorption keeps the housing dimensionally stable through humid storage and shipping
- Polypropylene housing retains its chemical integrity under vaporized hydrogen peroxide decontamination cycles used in aseptic processing isolators
- Plasticizer-free polyolefin construction keeps the fluid path clean
- Polypropylene housing withstands rated backpressure from dense sample matrices without deformation
A filter that softens or swells in your solvent fails you mid-run, batch after batch. Solvent-stream filtration handles the solvents and reagents your methods rely on across the organic solvents and harsh reagents your methods use. Request a quality certificate, lot documentation, or a blanket-order quote for your filtration order at any time.
Sterilization Guidance
Factory sterilization supports immediate use in workflows where sterility assurance matters.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 14.5psi
- Connection Type
- Luer-Lok/Luer Slip
- Diameter
- 13mm
- Filtration Area
- 1.09cm²
- Flow Rate
- 5ml
- Holdup Volume
- 10μL
- Material
- Polyvinylidene Fluoride (PVDF)
- Maximum Operating Pressure
- 87psi
- Maximum Operating Temperature (°C)
- 60°C
- Membrane Thickness (µm)
- 100-130μm
- Pack Count
- 100
- Pore Size (µm)
- 0.22
- Prefilter (Yes/No)
- Yes
- Prefilter Material
- PP
- Sterility
- Sterile
- Volume Throughput (ml)
- 10ml
- Weight
- 0.40
- Wettability
- Hydrophobic
- Beverage QC - Clarifies wine, beer, and juice samples ahead of HPLC testing for organic acids, sugars, and preservatives.
- Compressed Gas Filtration - Passes nitrogen and other inert gases freely while holding back moisture, protecting instruments and gas lines.
- Culture Vessel Filling - Equalizes pressure in sealed culture vessels by venting displaced air, keeping fill and drain lines fully closed.
- Organic Solvent Filtration - Wets readily with alcohols and mild hydrocarbons, delivering dependable clarification of organic solvent samples.
- Sterile Tank Venting - Blocks aqueous ingress on storage tanks and carboys, letting sterile air and gas pass through the vent line.
- Dissolution Testing - Removes undissolved particles from timed USP 711 dissolution aliquots, preventing skewed potency and release results.