Tisch Scientific PVDF Syringe Filters, 0.45 µm, 17 mm, 100/Pk - SF15615
Tisch Scientific's sales team brings fast, courteous service to every filtration order, from first quote through fulfillment. Many syringe filters ship with lot-specific quality documentation, giving analysts documented traceability beyond what an ad hoc bulk filtration setup typically provides. Hydrophobic PVDF passes gases freely while holding back water while tolerating common chromatography solvents without degradation and holds absolute retention steady across the entire membrane. Low-extractable polypropylene keeps sample purity intact through the filtration pass while pressing snugly against the membrane during the pass and stands firm against aqueous acids, bases, and alcohols during regular handling. For routine sample preparation across many methods, each analytical run starts with a consistent, particle-free sample without added hardware or a cleaning step.
Membrane Characteristics
- Cast membrane structure releases no fibers, unlike depth-media prefilters
- Low extractables preserve a clean chromatographic baseline
- Thin membrane structure sustains high flow for fast sample throughput
- Ethylene oxide sterilization cycles leave pore integrity and flow performance intact
- Chemical compatibility spans the full pH 1 to 14 range
Housing Characteristics
- Withstands standard 121°C steam autoclave cycles without softening or structural distortion
- Minimal ionic background from the polypropylene housing supports ion chromatography and trace-metal ICP-MS sample preparation
- Housing rated for reliable filtration under syringe-applied backpressure at its maximum operating pressure
- Medical-grade polypropylene with broad chemical compatibility
An aggressive solvent can leach or break down a vulnerable filter and carry debris into your prep. Solvent-stream filtration handles the solvents and reagents your methods rely on across the organic solvents and harsh reagents your methods use. Request a quality certificate, lot documentation, or a blanket-order quote for your filtration order at any time.
Sterilization Guidance
Customer autoclave compatibility at 121°C accommodates in-lab sterilization timing.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 5.8psi
- Connection Type
- Luer-Lok/Luer Slip
- Diameter
- 17mm
- Filtration Area
- 1.65cm²
- Flow Rate
- 12ml
- Holdup Volume
- 20μL
- Material
- Polyvinylidene Fluoride (PVDF)
- Maximum Operating Pressure
- 87psi
- Maximum Operating Temperature (°C)
- 60°C
- Membrane Thickness (µm)
- 100-130μm
- Pack Count
- 100
- Pore Size (µm)
- 0.45
- Prefilter (Yes/No)
- Yes
- Prefilter Material
- PP
- Sterility
- Nonsterile
- Sterilization
- Autoclave at 121°C for 30min/ gamma 25kGy
- Volume Throughput (ml)
- 20ml
- Weight
- 0.33
- Wettability
- Hydrophobic
- Dissolution Testing - Removes undissolved particles from timed USP 711 dissolution aliquots, preventing skewed potency and release results.
- Petroleum Sample Prep - Removes particulates from fuel and lubricant samples ahead of viscosity and quality-control testing.
- Organic Solvent Filtration - Wets readily with alcohols and mild hydrocarbons, delivering dependable clarification of organic solvent samples.
- Vial and Tubing Venting - Blocks liquid while venting sealed vials and tubing lines, keeping pressure equalized during fluid transfer steps.
- Culture Vessel Filling - Equalizes pressure in sealed culture vessels by venting displaced air, keeping fill and drain lines fully closed.
- Compressed Gas Filtration - Passes nitrogen and other inert gases freely while holding back moisture, protecting instruments and gas lines.