Tisch Scientific PVDF Syringe Filters, 0.22 µm, 4 mm, 200/Pk - SF17510
Tisch Scientific makes the ordering process straightforward, turning around requests for pricing and product information fast. A syringe filter with a hydrophobic vent-rated membrane keeps gas and vent lines free of microbial ingress. The PVDF membrane tolerates common chromatography solvents without degradation while repelling water for dependable gas and vent filtration and achieves sterile-grade retention at sub-micron pore sizes. The PP housing sustains efficient flow on viscous samples while pressing snugly against the membrane during the pass and stays inert across common laboratory solvents. No separate sterilization cycle is needed when the gas path already runs through a validated sterile-grade membrane.
Membrane Characteristics
- Fluoropolymer chemistry resists microbial and fungal degradation
- Cast membrane structure releases no fibers, unlike depth-media prefilters
- Resistance to hydrolytic degradation exceeds that of nylon membranes
- Low extractables preserve a clean chromatographic baseline
- Hydrophobic surface supports sterile venting of air and process gases
Housing Characteristics
- Withstands standard 121°C steam autoclave cycles without softening or structural distortion
- Minimal intrinsic autofluorescence from the polypropylene housing supports background-sensitive fluorescence-based assay work downstream
- Resists stress cracking from aqueous salt and buffer solutions
- Burst pressure rating provides a wide safety margin above the rated maximum operating pressure
Particulates left in your organic solvents and reagents carry downstream into the step that depends on a clean feed. Solvent-stream filtration handles the solvents and reagents your methods rely on across the organic solvents and harsh reagents your methods use. Request available pack sizes and lead times across this filtration line's membrane options from the Tisch Scientific team.
Sterilization Guidance
The housing supports customer autoclave sterilization at 121°C for 30 minutes.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 14.5psi
- Connection Type
- Luer-Lok/Luer Slip
- Diameter
- 4mm
- Filtration Area
- 0.125cm²
- Flow Rate
- 0.6ml
- Holdup Volume
- 1μL
- Material
- Polyvinylidene Fluoride (PVDF)
- Maximum Operating Pressure
- 87psi
- Maximum Operating Temperature (°C)
- 60°C
- Membrane Thickness (µm)
- 100-130μm
- Pack Count
- 200
- Pore Size (µm)
- 0.22
- Prefilter (Yes/No)
- Yes
- Prefilter Material
- PP
- Sterility
- Nonsterile
- Sterilization
- Autoclave at 121°C for 30min/ gamma 25kGy
- Volume Throughput (ml)
- 1ml
- Weight
- 0.24
- Wettability
- Hydrophobic
- Compressed Gas Filtration - Passes nitrogen and other inert gases freely while holding back moisture, protecting instruments and gas lines.
- Organic Solvent Filtration - Wets readily with alcohols and mild hydrocarbons, delivering dependable clarification of organic solvent samples.
- Beverage QC - Clarifies wine, beer, and juice samples ahead of HPLC testing for organic acids, sugars, and preservatives.
- Sterile Tank Venting - Blocks aqueous ingress on storage tanks and carboys, letting sterile air and gas pass through the vent line.
- QuEChERS Extract Prep - Removes co-extracted waxes and pigments from QuEChERS extracts, protecting GC-MS and LC-MS systems during pesticide testing.
- Dissolution Testing - Removes undissolved particles from timed USP 711 dissolution aliquots, preventing skewed potency and release results.