Tisch Scientific PVDF Syringe Filters, 0.45 µm, 4 mm, 200/Pk - SF17511
Tisch Scientific's representatives greet every caller with patience, whatever brings them to the phone. Syringe filters replace the separate holder and vacuum apparatus of bulk filtration with a single disposable unit, eliminating cleaning between samples. The PVDF membrane clarifies samples at the rated pore size while holding up to alcohols and mild hydrocarbon solvents and blocks aqueous ingress in venting applications. Polypropylene construction maintains a low-dead-volume internal flow path while keeping sample purity intact through the filtration pass and resists degradation from routine sample matrices. Where small-volume samples must reach the instrument clean, low hold-up volume keeps sample loss minimal while the instrument stays protected from particulate damage.
Membrane Characteristics
- Mechanically durable membrane holds integrity under filtration pressure
- Vapor-phase hydrogen peroxide decontamination cycles leave the membrane intact
- Absolute pore rating ensures reproducible results between test runs
- Fluoropolymer chemistry resists microbial and fungal degradation
- Hydrochloric, dilute nitric, and up to 90% sulfuric acid cause no attack
Housing Characteristics
- Rigid polypropylene body maintains its geometry through routine filtration pressure
- Resists stress cracking from aqueous salt and buffer solutions
- Optimized internal geometry minimizes backpressure in service
- Withstands standard 121°C steam autoclave cycles without softening or structural distortion
An aggressive solvent can leach or break down a vulnerable filter and carry debris into your prep. Solvent-stream filtration handles the solvents and reagents your methods rely on from initial prep through final use. Request blanket-order pricing and paperwork support for your routine filtration purchases.
Sterilization Guidance
Standard autoclave cycles at 121°C for 30 minutes prepare the device for sterile workflows.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 5.8psi
- Connection Type
- Luer-Lok/Luer Slip
- Diameter
- 4mm
- Filtration Area
- 0.125cm²
- Flow Rate
- 1ml
- Holdup Volume
- 1μL
- Material
- Polyvinylidene Fluoride (PVDF)
- Maximum Operating Pressure
- 87psi
- Maximum Operating Temperature (°C)
- 60°C
- Membrane Thickness (µm)
- 100-130μm
- Pack Count
- 200
- Pore Size (µm)
- 0.45
- Prefilter (Yes/No)
- Yes
- Prefilter Material
- PP
- Sterility
- Nonsterile
- Sterilization
- Autoclave at 121°C for 30min/ gamma 25kGy
- Volume Throughput (ml)
- 1ml
- Weight
- 0.24
- Wettability
- Hydrophobic
- Compressed Gas Filtration - Passes nitrogen and other inert gases freely while holding back moisture, protecting instruments and gas lines.
- Beverage QC - Clarifies wine, beer, and juice samples ahead of HPLC testing for organic acids, sugars, and preservatives.
- Bioreactor Vent Protection - Repels water while venting bioreactors and fermenters, keeping process air and gases moving freely through the line.
- Petroleum Sample Prep - Removes particulates from fuel and lubricant samples ahead of viscosity and quality-control testing.
- Dissolution Testing - Removes undissolved particles from timed USP 711 dissolution aliquots, preventing skewed potency and release results.
- Organic Solvent Filtration - Wets readily with alcohols and mild hydrocarbons, delivering dependable clarification of organic solvent samples.