Tisch Scientific PVDF Syringe Filters, 0.22 µm, 4 mm, 100/Pk - SF18227
Tisch Scientific reduces per-unit costs for laboratories that place blanket purchase agreements or large-quantity orders. A single-use hydrophobic vent filter reaches sterilizing-grade retention on a vent line without the autoclave cycle or in-line housing a reusable gas filtration setup would require. Hydrophobic PVDF passes gases freely while holding back water and achieves sterile-grade retention at sub-micron pore sizes. The polypropylene housing presses snugly against the membrane during the pass while providing a factory-sterilized fluid path suited to aseptic sample preparation and preserves sample chemistry across the flow path. Downstream equipment and work areas stay protected from airborne bacterial contamination once the vent path runs through the membrane.
Membrane Characteristics
- Ethylene oxide sterilization cycles leave pore integrity and flow performance intact
- Gamma irradiation sterilization causes no chain scission unlike polypropylene membranes
- Autoclave sterilization cycles leave pore structure and flow performance intact
- Low extractables preserve a clean chromatographic baseline
- Organic solvent resistance beats PES or nylon at comparable pore size
Housing Characteristics
- Polypropylene housing withstands rated backpressure from dense sample matrices without deformation
- Polypropylene density near 0.90 g/cm3 keeps housing weight low relative to denser engineering plastics
- Polypropylene housing tolerates ethylene oxide gas sterilization cycles without softening or dimensional distortion
- Rigid polypropylene body maintains its geometry through routine filtration pressure
Particulates left in your organic solvents and reagents carry downstream into the step that depends on a clean feed. Solvent-stream filtration handles the solvents and reagents your methods rely on across the organic solvents and harsh reagents your methods use. Request a quote on bulk pricing for larger filtration orders from the Tisch Scientific team.
Sterilization Guidance
Sterile single-use packaging removes any in-lab sterilization preparation step.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 14.5psi
- Connection Type
- Luer-Lok/Luer Slip
- Diameter
- 4mm
- Filtration Area
- 0.125cm²
- Flow Rate
- 0.6ml
- Holdup Volume
- 1μL
- Material
- Polyvinylidene Fluoride (PVDF)
- Maximum Operating Pressure
- 87psi
- Maximum Operating Temperature (°C)
- 60°C
- Membrane Thickness (µm)
- 100-130μm
- Pack Count
- 100
- Pore Size (µm)
- 0.22
- Prefilter (Yes/No)
- Yes
- Prefilter Material
- PP
- Sterility
- Sterile
- Volume Throughput (ml)
- 1ml
- Weight
- 0.33
- Wettability
- Hydrophobic
- Organic Solvent Filtration - Wets readily with alcohols and mild hydrocarbons, delivering dependable clarification of organic solvent samples.
- Bioreactor Vent Protection - Repels water while venting bioreactors and fermenters, keeping process air and gases moving freely through the line.
- Beverage QC - Clarifies wine, beer, and juice samples ahead of HPLC testing for organic acids, sugars, and preservatives.
- Culture Vessel Filling - Equalizes pressure in sealed culture vessels by venting displaced air, keeping fill and drain lines fully closed.
- Vial and Tubing Venting - Blocks liquid while venting sealed vials and tubing lines, keeping pressure equalized during fluid transfer steps.
- Compressed Gas Filtration - Passes nitrogen and other inert gases freely while holding back moisture, protecting instruments and gas lines.