Tisch Scientific PVDF Syringe Filters, 0.22 µm, 25 mm, 100/Pk - SPEC18207
Tisch Scientific vets its filtration partners carefully, favoring those with a consistent record of dependable output. A single-use hydrophobic vent filter reaches sterilizing-grade retention on a vent line without the autoclave cycle or in-line housing a reusable gas filtration setup would require. The hydrophobic PVDF membrane blocks aqueous ingress in venting applications while providing sterilizing-grade retention at sub-micron pore sizes and tolerates common chromatography solvents without degradation. The PP housing stays inert across common laboratory solvents and buffers in routine use while routing flow to minimize backpressure in service and presses snugly against the membrane during the pass. Downstream equipment and work areas stay protected from airborne bacterial contamination once the vent path runs through the membrane.
Membrane Characteristics
- Ethylene oxide sterilization cycles leave pore integrity and flow performance intact
- Fluorinated polymer chemistry resists ozone, UV, and ionizing radiation
- Gamma irradiation sterilization causes no chain scission unlike polypropylene membranes
- Cast membrane structure releases no fibers, unlike depth-media prefilters
- Absolute pore rating ensures reproducible results between test runs
Housing Characteristics
- The seal formed against the membrane blocks bypass at rated operating pressure
- Minimal extractable release from the housing supports sensitive analytical work downstream
- Withstands standard 121°C steam autoclave cycles without softening or structural distortion
- Rigid polypropylene body maintains its geometry through routine filtration pressure
An aggressive solvent can leach or break down a vulnerable filter and carry debris into your prep. Solvent-stream filtration handles the solvents and reagents your methods rely on from initial prep through final use. Request a quote on bulk pricing for larger filtration orders from the Tisch Scientific team.
Sterilization Guidance
Standard autoclave cycles at 121°C for 30 minutes prepare the device for sterile workflows.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 7.25psi
- Burst Pressure (psi)
- 116psi
- Connection Type
- Double Luer Lock
- Construction
- Polypropylene (PP)
- Diameter
- 25mm
- Dimensions (W x D x H)
- 21.8mmx28.6mm
- Material
- Polyvinylidene Fluoride (PVDF)
- Maximum Operating Pressure
- 72.5psi
- Maximum Operating Temperature (°C)
- 80℃
- Pack Count
- 100
- Pore Size (µm)
- 0.22
- Sterility
- Nonsterile
- Weight
- 0.58
- Wettability
- Hydrophobic
- Vial and Tubing Venting - Blocks liquid while venting sealed vials and tubing lines, keeping pressure equalized during fluid transfer steps.
- Beverage QC - Clarifies wine, beer, and juice samples ahead of HPLC testing for organic acids, sugars, and preservatives.
- Bioreactor Vent Protection - Repels water while venting bioreactors and fermenters, keeping process air and gases moving freely through the line.
- Sterile Tank Venting - Blocks aqueous ingress on storage tanks and carboys, letting sterile air and gas pass through the vent line.
- Culture Vessel Filling - Equalizes pressure in sealed culture vessels by venting displaced air, keeping fill and drain lines fully closed.
- Organic Solvent Filtration - Wets readily with alcohols and mild hydrocarbons, delivering dependable clarification of organic solvent samples.