Tisch Scientific PVDF Syringe Filters, 0.45 µm, 25 mm, 100/Pk - SPEC18208
Tisch Scientific's sales team brings fast, courteous service to every filtration order, from first quote through fulfillment. A syringe filter dispenses filtrate directly into an autosampler vial, without the intermediate collection vessel a bulk vacuum filtration setup typically needs. PVDF resists HPLC mobile phases, alcohols, and mild hydrocarbons and rejects particles above its absolute size threshold. Polypropylene construction maintains a low-dead-volume internal flow path and delivers a chemically clean filtrate to the downstream step. Where analytical results depend on clean samples, the preparation step stays consistent from sample to sample through a pre-tested syringe filter.
Membrane Characteristics
- Hydrophobic surface supports sterile venting of air and process gases
- Hydrophobic surface chemistry gives PVDF a water contact angle above 100 degrees, blocking wetting
- Low extractables preserve a clean chromatographic baseline
- Gamma irradiation sterilization causes no chain scission unlike polypropylene membranes
- Thin membrane structure sustains high flow for fast sample throughput
Housing Characteristics
- Standardized luer connection geometry provides secure engagement with standard syringe tips
- Double luer-lock connections on inlet and outlet deliver a secure, leak-resistant in-line path for continuous filtration
- Housing tolerates elevated-temperature aqueous and solvent sample filtration up to about 80°C without softening
- Rigid polypropylene body maintains its geometry through routine filtration pressure
A filter that softens or swells in your solvent fails you mid-run, batch after batch. Solvent-stream filtration handles the solvents and reagents your methods rely on across the organic solvents and harsh reagents your methods use. Request available pack sizes and lead times across this filtration line's membrane options from the Tisch Scientific team.
Sterilization Guidance
Customer autoclave compatibility at 121°C accommodates in-lab sterilization timing.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 4.35psi
- Burst Pressure (psi)
- 116psi
- Connection Type
- Double Luer Lock
- Construction
- Polypropylene (PP)
- Diameter
- 25mm
- Dimensions (W x D x H)
- 21.8mmx28.6mm
- Material
- Polyvinylidene Fluoride (PVDF)
- Maximum Operating Pressure
- 72.5psi
- Maximum Operating Temperature (°C)
- 80℃
- Pack Count
- 100
- Pore Size (µm)
- 0.45
- Sterility
- Nonsterile
- Weight
- 0.58
- Wettability
- Hydrophobic
- Beverage QC - Clarifies wine, beer, and juice samples ahead of HPLC testing for organic acids, sugars, and preservatives.
- Compressed Gas Filtration - Passes nitrogen and other inert gases freely while holding back moisture, protecting instruments and gas lines.
- Organic Solvent Filtration - Wets readily with alcohols and mild hydrocarbons, delivering dependable clarification of organic solvent samples.
- Bioreactor Vent Protection - Repels water while venting bioreactors and fermenters, keeping process air and gases moving freely through the line.
- QuEChERS Extract Prep - Removes co-extracted waxes and pigments from QuEChERS extracts, protecting GC-MS and LC-MS systems during pesticide testing.
- Robust Particulate Filtration - Withstands high pressure differentials while handling heavy particulate loads, extending membrane service life.