Chat with us, powered by LiveChat

Secure Checkout
PVDF Syringe Filters, 1.0um, 25mm, Double Luer Lock, PP Housing, Nonsterile, 100/Pk

Thumbnail Filmstrip of PVDF Syringe Filters, 1.0um, 25mm, Double Luer Lock, PP Housing, Nonsterile, 100/Pk Images

    Purchase PVDF Syringe Filters, 1.0um, 25mm, Double Luer Lock, PP Housing, Nonsterile, 100/Pk

    PVDF Syringe Filters, 1.0um, 25mm, Double Luer Lock, PP Housing, Nonsterile, 100/Pk
    Tisch SKU: SPEC18209

    $121.99
    Only 9 in stock. Order now!
     

    Tisch Scientific PVDF Syringe Filters, 1 µm, 25 mm, 100/Pk - SPEC18209

    Tisch Scientific reduces per-unit costs for laboratories that place blanket purchase agreements or large-quantity orders. Syringe filters span a wide range of membrane chemistries and pore sizes, so the format can be matched to the sample matrix and solvent system in use. PVDF resists HPLC mobile phases, alcohols, and mild hydrocarbons and blocks aqueous ingress in venting applications. The polypropylene housing resists aqueous acids, bases, and alcohols in routine use while sustaining efficient flow on viscous samples and delivers a chemically clean filtrate to the downstream step. For routine sample preparation across many methods, each analytical run starts with a consistent, particle-free sample without added hardware or a cleaning step.

    Membrane Characteristics

    • Vapor-phase hydrogen peroxide decontamination cycles leave the membrane intact
    • Resistance to hydrolytic degradation exceeds that of nylon membranes
    • Gamma irradiation sterilization causes no chain scission unlike polypropylene membranes
    • Fluorinated polymer chemistry resists ozone, UV, and ionizing radiation
    • Hydrochloric, dilute nitric, and up to 90% sulfuric acid cause no attack

    Housing Characteristics

    • Rigid polypropylene body maintains its geometry through routine filtration pressure
    • Withstands standard 121°C steam autoclave cycles without softening or structural distortion
    • Burst pressure rating provides a wide safety margin above the rated maximum operating pressure
    • Impact-tolerant polypropylene body withstands routine bench handling without damage

    An aggressive solvent can leach or break down a vulnerable filter and carry debris into your prep. Solvent-stream filtration handles the solvents and reagents your methods rely on from initial prep through final use. Request a quote on bulk pricing for larger filtration orders from the Tisch Scientific team.

    Sterilization Guidance

    Standard autoclave cycles at 121°C for 30 minutes prepare the device for sterile workflows.

    For more information about chemical compatibility, please review our Chemical Compatibility Chart.

    Bubble Point (psi)
    1.45psi
    Burst Pressure (psi)
    116psi
    Connection Type
    Double Luer Lock
    Construction
    Polypropylene (PP)
    Diameter
    25mm
    Dimensions (W x D x H)
    21.8mmx28.6mm
    Material
    Polyvinylidene Fluoride (PVDF)
    Maximum Operating Pressure
    72.5psi
    Maximum Operating Temperature (°C)
    80℃
    Pack Count
    100
    Pore Size (µm)
    1.0
    Sterility
    Nonsterile
    Weight
    0.58
    Wettability
    Hydrophobic
    • Beverage QC - Clarifies wine, beer, and juice samples ahead of HPLC testing for organic acids, sugars, and preservatives.
    • Vial and Tubing Venting - Blocks liquid while venting sealed vials and tubing lines, keeping pressure equalized during fluid transfer steps.
    • Bioreactor Vent Protection - Repels water while venting bioreactors and fermenters, keeping process air and gases moving freely through the line.
    • Petroleum Sample Prep - Removes particulates from fuel and lubricant samples ahead of viscosity and quality-control testing.
    • Compressed Gas Filtration - Passes nitrogen and other inert gases freely while holding back moisture, protecting instruments and gas lines.
    • Organic Solvent Filtration - Wets readily with alcohols and mild hydrocarbons, delivering dependable clarification of organic solvent samples.