Tisch Scientific PVDF Syringe Filters, 5 µm, 25 mm, 100/Pk - SPEC18211
Tisch Scientific holds its filtration pricing at levels that let budget-conscious laboratories stretch procurement dollars further. Many syringe filters ship with lot-specific quality documentation, giving analysts documented traceability beyond what an ad hoc bulk filtration setup typically provides. PVDF holds consistent absolute retention at the rated pore size while passing gases freely and holding back water and resists HPLC mobile phases, alcohols, and mild hydrocarbons. The PP housing stays inert across common laboratory solvents and buffers in routine use while preserving sample chemistry across the flow path and holds its seal true run after run. When chromatographic methods demand particle-free injections, the column stays clean from run to run, protecting method performance and column life.
Membrane Characteristics
- Chemical compatibility spans the full pH 1 to 14 range
- Autoclave sterilization cycles leave pore structure and flow performance intact
- Low extractables preserve a clean chromatographic baseline
- Gamma irradiation sterilization causes no chain scission unlike polypropylene membranes
- Absolute pore rating ensures reproducible results between test runs
Housing Characteristics
- Minimal intrinsic autofluorescence from the polypropylene housing supports background-sensitive fluorescence-based assay work downstream
- Polypropylene housing tolerates dilute aqueous acids, bases, and alcohols used in routine sample prep
- Rigid polypropylene body maintains its geometry through routine filtration pressure
- The seal formed against the membrane blocks bypass at rated operating pressure
A filter that softens or swells in your solvent fails you mid-run, batch after batch. Solvent-stream filtration handles the solvents and reagents your methods rely on across the organic solvents and harsh reagents your methods use. Request volume pricing and stock availability on your filtration product selection from the Tisch Scientific team.
Sterilization Guidance
Standard autoclave cycles at 121°C for 30 minutes prepare the device for sterile workflows.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Burst Pressure (psi)
- 116psi
- Connection Type
- Double Luer Lock
- Construction
- Polypropylene (PP)
- Diameter
- 25mm
- Dimensions (W x D x H)
- 21.8mmx28.6mm
- Material
- Polyvinylidene Fluoride (PVDF)
- Maximum Operating Pressure
- 72.5psi
- Maximum Operating Temperature (°C)
- 80℃
- Pack Count
- 100
- Pore Size (µm)
- 5.0
- Sterility
- Nonsterile
- Weight
- 0.58
- Wettability
- Hydrophobic
- Dissolution Testing - Removes undissolved particles from timed USP 711 dissolution aliquots, preventing skewed potency and release results.
- Compressed Gas Filtration - Passes nitrogen and other inert gases freely while holding back moisture, protecting instruments and gas lines.
- Bioreactor Vent Protection - Repels water while venting bioreactors and fermenters, keeping process air and gases moving freely through the line.
- Organic Solvent Filtration - Wets readily with alcohols and mild hydrocarbons, delivering dependable clarification of organic solvent samples.
- Petroleum Sample Prep - Removes particulates from fuel and lubricant samples ahead of viscosity and quality-control testing.
- Vial and Tubing Venting - Blocks liquid while venting sealed vials and tubing lines, keeping pressure equalized during fluid transfer steps.