PVDF Syringe Filters, 1.0um, 25mm, Double Luer Lock, PP Housing, Sterile, 100/Pk
Tisch SKU: SPEC18214

Tisch Scientific PVDF Syringe Filters, 1 µm, 25 mm, 100/Pk - SPEC18214

Tisch Scientific works with established filtration manufacturers to ensure reliable quality and performance. A syringe filter seats a membrane in a sealed housing that threads onto a standard luer fitting. PVDF delivers absolute particle cutoff at the rated pore size and passes gases freely while holding back water. The polypropylene housing contributes minimal extractables to the filtrate while resisting aqueous acids, bases, and alcohols in routine use and holds a reliable seal against the membrane edge. Where small-volume samples must reach the instrument clean, syringe filtration clears particulates in a single pass.

Technical Specifications

• Resists HPLC mobile phases, alcohols, and mild hydrocarbons
• Absolute pore size rating gives consistent results across protocols
• Low extractables preserve a clean chromatographic baseline
• Thin membrane structure sustains high flow for fast sample throughput
• Mechanically durable membrane holds integrity under filtration pressure

Housing Specifications

• Resists stress cracking from aqueous salt and buffer solutions
• Rigid polypropylene body holds its shape under manual filtration pressure
• Stable across the full aqueous pH range in routine sample work
• Resists aqueous acids, bases, and alcohols in routine sample prep

Filtering aggressive solvents and reagents through a filter that holds up to the chemistry keeps your sample prep reliable. Reliable solvent prefiltration clears particulates from your organic samples ahead of HPLC and UPLC injection. Contact Tisch Scientific for technical guidance on selecting the right filtration product for your specific application requirements.

For more information about chemical compatibility, please review our Chemical Compatibility Chart.

Bubble Point (psi)

1.45psi

Burst Pressure (psi)

116psi

Connection Type

Double Luer Lock

Construction

Polypropylene (PP)

Diameter

25mm

Dimensions (W x D x H)

21.8mmx28.6mm

Material

Polyvinylidene Fluoride (PVDF)

Maximum Operating Pressure

72.5psi

Maximum Operating Temperature (°C)

80℃

Pack Count

100

Pore Size (µm)

1.0

Sterility

Sterile

Weight

0.70

Wettability

Hydrophobic

• Sterile Venting Protection - Protect laboratory vessels from airborne particulates and moisture by using the hydrophobic membrane as a barrier
• Organic Solvent Prefiltration - Remove gross contaminants from organic solvents to prevent blockage of downstream fine filtration membranes
• Process Gas Filtration - Remove particulates from process gases and air lines to prevent contamination of sensitive laboratory equipment
• Aggressive Chemical Clarification - Clarify aggressive chemical samples for chromatography, maintaining chemical stability and analytical accuracy
• Viscous Solvent Processing - Process difficult viscous organic fluids using the coarse pore structure to maintain consistent processing speeds
• Aseptic Chemical Prep - Filter manufacturing batches containing heavy sediment loads for quality control analysis without rapid membrane degradation